지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2023.1
- 수록면
- 235 - 246 (12page)
- DOI
- 10.1007/s12540-022-01217-5
이용수
초록· 키워드
오류제보하기
Using a thermal–mechanical process, the average grain size of Co35Ni34Cr24Mo7medium entropy alloy was reduced to 2 μm,resulted in 50% improvement of hardness. In this way, the kinetic of the recrystallization and grain growth were investigatedby annealing at the temperature range of 800–950 °C. Based on Differential Scanning Calorimetry analysis and microstructuralinvestigations, recrystallization began around 800 °C at prior grain boundaries, micro shear bands, and intersecteddeformation marking. Comparing Johnson–Mehl–Avrami–Kolmogorov and Austin-Ricket approaches for recrystallizationmodeling the, revealed that the latter is more accurate considering its basic theory, which involves reducing recrystallizationrate by impingement. Both recrystallization and grain growth activation energy were calculated around 380 kJ/mol, which isclose to the activation energy of self-diffusion of similar high/medium entropy alloys. The recrystallization and grain growthtime exponent were found to be less than 0.5, which indicates the heterogeneous deformation and recrystallization in structureand pining effect of Mo on the grain boundaries migration. It was observed that the annealed microstructure containsannealing twins, which their number and thickness are related to the recrystallized grain size. Moreover, it was revealed thatdue to the presence of annealing twins, the modified Hall–Petch equation with effective grain size is more appropriate toexplain the relation of grain size and hardness.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Effects of Grain Boundary on {100} Recrystallization Texture of High Silicon Electrical Steel
Metals and Materials International
2018 .01
-
Nucleation Mechanism of Discontinuous Dynamic Recrystallization with Restrained Grain Boundary Sliding
Metals and Materials International
2021 .12
-
순도에 따른 Al 판재의 재결정 거동
한국재료학회지
2016 .01
-
Grain Refinement and Thermal Stability of 2219 Aluminum Alloy in the Warm Deformation Process
Metals and Materials International
2021 .11
-
유역분할 알고리즘을 이용한 결정립 크기 측정
한국표면공학회지
2022 .12
-
열처리조건에 따른 AZ61 마그네슘 합금의 미세조직과 감쇠능에 미치는 영향
열처리공학회지
2018 .01
-
Bimodal-Structured Al?Mg Alloy with High Strength and Ductility Processed by High Strain Rate Rolling at Medium Temperature
Metals and Materials International
2021 .12
-
JMAK 결정립 모델의 몬테카를로 시뮬레이션
한국소성가공학회 학술대회 논문집
2016 .04
-
Development of Grain Boundary Character Distribution in Medium‑Strained 316L Stainless Steel During Annealing
Metals and Materials International
2019 .01
-
Uncovering Microstructure Evolution and Dynamic Softening Mechanism of Spray-Deposited AlZnMgCu Alloy Under Thermal Deformation
Metals and Materials International
2022 .09
-
탄탈륨 판재의 어닐링 집합조직과 결정립 크기
소성·가공
2019 .10
-
Influence of Forging Temperature on the Microstructures and Mechanical Properties of a Multi-Directionally Forged Al?Cu?Li Alloy
Metals and Materials International
2022 .02
-
Rapid Annealing of Severely Deformed Low Carbon Steel in Subcritical Temperature Range
Metals and Materials International
2017 .01
-
Effect of Pre-Precipitation on Microstructure and Mechanical Properties of Extruded Mg-Sn-Zn Alloys
Metals and Materials International
2015 .01
-
Development of Ultrafine Grain Structure in an Al–Mg–Mn–Sc–Zr Alloy During High-Temperature Multidirectional Isothermal Forging
Metals and Materials International
2021 .01
-
변형률 속도에 따른 탄소강의 재결정 거동에 미치는 미량 합금 원소의 영향
한국재료학회지
2016 .01
-
Ni계 산화물 분산 강화 합금의 방향성 재결정에 미치는존 어닐링 속도의 영향
한국분말야금학회지
2018 .01
-
Grain Morphology and Orientation Effect on the High‑Temperature Tensile Behavior of Directionally Solidified Magnesium Alloy
Metals and Materials International
2020 .01
-
Concurrent Recrystallization and Precipitation for Combination of Superior Precipitation and Grain Boundary Hardening in Co37Cr20Ni37Ti3Al3 High-Entropy Alloy
Metals and Materials International
2022 .12
-
Investigation on Texture Evolution and Recrystallization Aspects of Novel Mg?Zn?Gd?Y?Nd Alloys
Metals and Materials International
2021 .10
이 논문의 저자 정보
최근 본 자료
댓글(0)
0