메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
이동신 (성균관대학교) 유한솔 (성균관대학교) 김수빈 (성균관대학교) 배성한 (성균관대학교) 김윤제 (성균관대학교)
저널정보
한국유체기계학회 한국유체기계학회 논문집 한국유체기계학회 논문집 제26권 제6호(통권 제141호)
발행연도
2023.12
수록면
69 - 78 (10page)
DOI
10.5293/kfma.2023.26.6.069

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
Compressors are used in many industries as gas transfer and venting systems. However, there are many cases where compressors are not used due to various problems such as limited physical space, limited power, and low economic efficiency. In particular, in a system that delivers by-product gases generated during the semiconductor process to a gas treatment device, the gas must be transferred quickly to prevent the gas phase change into a solid and block the pipeline. A compact fluid machine can fulfill all of these conditions and replace the role of a compressor. The flow characteristics of two amplifiers in serial arrangement conditions were studied. ANSYS Fluent 2023 R1 was used for numerical analysis. The turbulence model was set to SST (Shear Stress Transport), and the k-ω model was used near the wall surface and the k-ϵ model was used for the internal flow to improve the consistency of the flow analysis. As a result, if the twisting angle between the amplifiers is 180 degrees and the inlet of the secondary flow is placed on the streamwise direction of the amplifier, the amplification rate is improved by an average of 4%. Results also show that if the ratio of mass flow rate in each amplifier is set to 19:1, it can be improved by 136%.

목차

ABSTRACT
1. 서론
2. 해석모델과 경계조건
3. 수치해석
4. 결과 및 고찰
5. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0