지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- Korean Society for Precision Engineering Journal of the Korean Society for Precision Engineering Journal of the Korean Society for Precision Engineering Vol.41 No.4
- 발행연도
- 2024.4
- 수록면
- 321 - 328 (8page)
- DOI
- 10.7736/JKSPE.024.003
이용수
초록· 키워드
오류제보하기
A feasibility study of electrically assisted solid-state spot joining (EASSJ) of dissimilar aluminum alloys for automobile structures was conducted. EASSJ of dissimilar automotive aluminum alloys (AA6451 and AA6014) was conducted by simultaneously applying step-by-step current and compressive load to the faying interface (lap spot joining), while the temperature was controlled to be lower than melting points of joining alloys. To evaluate the soundness of the joint, a nugget pull-out fracture mode under shear tensile test was set as a criterion. Microstructure analysis was also conducted to evaluate characteristics of the joint. Experimental results suggest that the EASSJ is clearly feasible in joining dissimilar aluminum alloys for automobile structures.
목차
1. 서론
2. 사용 소재 및 실험 방법
3. 결과 및 분석
4. 결론
REFERENCES
참고문헌 (22)
참고문헌 신청
Han, B.-S., Kim, S.-H., Sin, J.-H., Kim, J.-P., Kim, D.-O., Seong, S.-Y., (2022), Automotive technology trends and lightweight technology, Journal of Korea Foundry Society, 42(2), 97-104. Korean, etc.
Wadas, T., Tisza, M., (2020), Lightweight manufacturing of automotive parts, IOP Conference Series: Materials Science and Engineering, 903(1), 012036.
Singh, M. K., (2016), Application of steel in automotive industry, International Journal of Emerging Technology and Advanced Engineering, 6(7), 246-253.
Lee, J.-J., Son, C.-S., Park, Y. W., (2018), Resistance spot welding characteristic of 1500 MPa steel sheet using simulation (II)-estimation model for nugget diameter of resistance spot welds, Journal of Welding and Joining, 36(3), 51-56.
Rajarajan, C., Sivaraj, P., Sonar, T., Raja, S., Mathiazhagan, N., (2022), Resistance spot welding of advanced high strength steel for fabrication of thin-walled automotive structural frames, Forces in Mechanics, 7, 100084.
Wadas, T., Tisza, M., (2020), Lightweight manufacturing of automotive parts, IOP Conference Series: Materials Science and Engineering, 903(1), 012036.
Singh, M. K., (2016), Application of steel in automotive industry, International Journal of Emerging Technology and Advanced Engineering, 6(7), 246-253.
Lee, J.-J., Son, C.-S., Park, Y. W., (2018), Resistance spot welding characteristic of 1500 MPa steel sheet using simulation (II)-estimation model for nugget diameter of resistance spot welds, Journal of Welding and Joining, 36(3), 51-56.
Rajarajan, C., Sivaraj, P., Sonar, T., Raja, S., Mathiazhagan, N., (2022), Resistance spot welding of advanced high strength steel for fabrication of thin-walled automotive structural frames, Forces in Mechanics, 7, 100084.
이 논문과 함께 이용한 논문
Electrically assisted solid-state spot joining of dissimilar SGACUD steel and aluminum 6451 alloy
S. H. Choo
,
V. C. Phan
,
J.W. Do
외 3명
한국소성가공학회 학술대회 논문집
2024
.10
파워 개폐 시스템의 반전 성능 향상을 위한 측정 방법 및 제어법
정원우
,
홍성태
한국자동차공학회 추계학술대회 및 전시회
2024
.11
Dry Metal Forming Using CO₂ as Volatile Media Injected through Die
L. H. Cai
,
J. W. Kang
,
S. T. Hong
한국정밀공학회 학술발표대회 논문집
2021
.05
Cryogenic tube bending AA6061-T6: Concepts and Feasibility
Yixing Zhao
,
Lihong Cai
,
Meiling Geng
외 6명
한국소성가공학회 학술대회 논문집
2024
.10
Post-weld heat treatment on friction stir welded AA6061-T6: microstructure and mechanical properties
V.C.Phan
,
J.H.Jeon
,
H.J.Lee
외 5명
한국소성가공학회 학술대회 논문집
2024
.10
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-151-24-02-089603390