지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2024.6
- 수록면
- 176 - 187 (12page)
- DOI
- 10.7746/jkros.2024.19.2.176
이용수
초록· 키워드
오류제보하기
Recently, automated solutions using collaborative robots have been emerging in various industries. Their primary functions include Pick & Place, Peg in the Hole, fastening and assembly, welding, and more, which are being utilized and researched in various fields. The application of these robots varies depending on the characteristics of the grippers attached to the end of the collaborative robots. To grasp a variety of objects, a gripper with a high degree of freedom is required. In this paper, we propose a service automation system using a multi-degree-of-freedom gripper, collaborative robots, and vision sensors. Assuming various products are placed at a checkout counter, we use three cameras
to recognize the objects, estimate their pose, and create grasping points for grasping. The grasping points are grasped by the multi-degree-of-freedom gripper, and experiments are conducted to recognize barcodes, a key task in service automation. To recognize objects, we used a CNN (Convolutional Neural Network) based algorithm and point cloud to estimate the object’s 6D pose. Using the recognized object’s 6d pose information, we create grasping points for the multi-degree-of-freedom gripper and perform re-grasping in a direction that facilitates barcode scanning. The experiment was conducted with four selected objects, progressing through identification, 6D pose estimation, and grasping, recording the success and failure of barcode recognition to prove the effectiveness of the proposed system.
to recognize the objects, estimate their pose, and create grasping points for grasping. The grasping points are grasped by the multi-degree-of-freedom gripper, and experiments are conducted to recognize barcodes, a key task in service automation. To recognize objects, we used a CNN (Convolutional Neural Network) based algorithm and point cloud to estimate the object’s 6D pose. Using the recognized object’s 6d pose information, we create grasping points for the multi-degree-of-freedom gripper and perform re-grasping in a direction that facilitates barcode scanning. The experiment was conducted with four selected objects, progressing through identification, 6D pose estimation, and grasping, recording the success and failure of barcode recognition to prove the effectiveness of the proposed system.
목차
Abstract
1. 서론
2. 시스템 구성
3. 알고리즘
4. 물체 자세 추정
5. 물체 파지 계획
6. 실험
7. 결론
References
참고문헌 (0)
참고문헌 신청이 논문과 함께 이용한 논문
마이크로 로봇 작동 성능 향상을 위한 FEM 기반의 전자석 배치 베이지안 최적화
권혁진
,
손동훈
로봇학회 논문지
2024
.03
로봇팔을 지닌 물류용 자율주행 전기차 플랫폼 개발
정의정
,
박성호
,
전광우
외 2명
로봇학회 논문지
2023
.03
로봇 팔을 활용한 정리작업을 위한 물체 자세추정 및 이미지 매칭
박정란
,
조현준
,
송재복
로봇학회 논문지
2021
.12
과수원 환경에서 자율주행로봇을 위한 경로 연속성 기반 GPS오정보 필터링 연구
윤혜원
,
곽정훈
,
양견모
외 4명
로봇학회 논문지
2024
.03
기능형 의수를 위한 텐스그리티 관절 구조 기반의 유연하고 가벼운 로봇 핸드 개발
이건
,
최영진
로봇학회 논문지
2024
.03
최근 본 자료
댓글(0)
0