지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2024.1
- 수록면
- 257 - 264 (8page)
- DOI
- 10.1016/j.net.2023.09.033
이용수
초록· 키워드
오류제보하기
The sodium cooled fast reactor (SFR) is one of the Gen-IV reactors with the most operating experience accumulated.
Although the technology level is the most mature among the Gen-IV reactors, there is still a safety problem that has not been solved, which is the sodium-water reaction. Since sodium and water are separated only by a heat transfer tube with a thickness of only a few mm, there is inherently a risk of a sodium-water reaction (SWR) accident in the SFR. In this study, it is attempted to quantitatively evaluate the resistance of SWR accidents by replacing the shell and tube steam generator with printed circuit steam generator (PCSG) as a method to mitigate the SWR accident. To do this, a CATS-S (Compact Accident Tolerance Steam Generator-SWR) facility was designed and built. And for the quantitative evaluation of accident resistance, a methodology for measuring the impingement wastage rate was established. As a result of this research, the impingement wastage rate caused by SWR generated in a PCSG was measured first time. It was confirmed that the impingement wastage phenomenon was suppressed in the PCSG, and the accident resistance was higher than that of the SWR through comparison with the experimental results performed in the existing shell and tube steam generator. In conclusion, a PCSG is more resistant to impingement wastage as a result of the SWR accident than existing shell and tube steam generators, and it is estimated that a PCSG can mitigate SWR accidents, an inherent problem of SFR.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
고효율 인쇄기판형 열교환장치의 증기발생기분야 적용을 위한 예비크기 산정
대한설비공학회 학술발표대회논문집
2018 .06
-
Fundamental evaluation of hydrogen behavior in sodium for sodium-water reaction detection of sodium-cooled fast reactor
Nuclear Engineering and Technology
2024 .03
-
Evaluation for a Sodium Water Reaction Event due to Steam Generator Tubes Break in the PGSFR
Nuclear Engineering and Technology
2016 .01
-
소듐냉각고속로용 인쇄기판형 증기발생기의 열성능 및 소듐-물 반응 압력전파에 대한 수치적 연구
한국유체기계학회 논문집
2021 .04
-
다양한 운전조건에 대한 인쇄기판형 증기발생기의 열수력적 거동
대한기계학회 춘추학술대회
2021 .11
-
NUMERICAL APPROACH FOR QUANTIFICATION OF SELFWASTAGE PHENOMENA IN SODIUM-COOLED FAST REACTOR
Nuclear Engineering and Technology
2015 .01
-
SAFETY ASPECTS OF INTERMEDIATE HEAT TRANSPORT AND DECAY HEAT REMOVAL SYSTEMS OF SODIUM-COOLED FAST REACTORS
Nuclear Engineering and Technology
2015 .04
-
Superheated Water-Cooled Small Modular Underwater Reactor Concept
Nuclear Engineering and Technology
2016 .01
-
구리밀봉 증기발생기 설계코드의 개발과 이를 이용한 TRU 함유 노심계통의 증기발생기 설계
한국유체기계학회 논문집
2020 .10
-
건조한 수박 껍질의 설폰화를 이용한 수용액에서 납 흡착 제거
한국수처리학회지
2020 .01
-
실록산계 흡수방지재를 도포한 콘크리트의 염소이온침투저항성과 내화학성에 미치는 콘크리트 강도의 효과
콘크리트학회 논문집
2018 .12
-
Structural integrity assessment procedure of PCSG unit block using homogenization method
Nuclear Engineering and Technology
2023 .04
-
Modeling of Hydrodynamic Processes at a Large Leak of Water into Sodium in the Fast Reactor Coolant Circuit
Nuclear Engineering and Technology
2016 .01
-
소듐냉각고속로 원형로 소듐-물 반응 압력완화계통 성능 해석 연구
화학공학
2019 .01
-
Effect of Tube Thickness on Thermal-Hydraulic Design of a Once-Through Steam Generator
대한기계학회 춘추학술대회
2023 .04
-
Thermal-Hydraulic Design of a Once-Through Steam Generator Considering a Size Limit
대한기계학회 춘추학술대회
2022 .11
-
Optimization and Evaluation of Spherical Tube Sheet Design for Steam Generator
대한기계학회 춘추학술대회
2024 .11
-
Signal processing method based on energy ratio for detecting leakage of SG using EVFM
Nuclear Engineering and Technology
2020 .08
-
An efficient seismic analysis technique for PCSG assembly using sub-structuring method and homogenization method
Nuclear Engineering and Technology
2024 .06
-
Effect of Axial Tube Pitch on Thermal-Hydraulic Design of a Once-Through Steam Generator
대한기계학회 춘추학술대회
2020 .12
최근 본 자료
댓글(0)
0