메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
김병국 (아주대학) 김현정 (아주대학)
저널정보
대한설비공학회 설비공학논문집 설비공학논문집 제36권 제9호
발행연도
2024.9
수록면
466 - 473 (8page)
DOI
10.6110/KJACR.2024.36.9.466

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Various methods exist for joining fire pipes. This study investigated the pressure loss caused by grooves in the pipe using the grooved joint bonding method. The groove size was very small, and the equivalent length presented by each design workbook was different, making it difficult to design. Particularly, fire extinguishing facilities in systems with many grooves compared to other facilities, such as tunnel fire extinguishing facilities, are expected to vary greatly. As the uneven part is fine, the actual measurement experiment is difficult, so it was analyzed using numerical analysis. A sudden change in pressure caused by the expansion and reduction of the groove and pressure loss caused by a recirculation vortex in the expansion part occurred. The grooved joint pressure loss equivalent length at 100A was 0.225 m, 125A was 0.333 m, 150A was 0.305 m, 200A was 0.285 m, 250A was 0.276 m, and 300A was 0.330 m, for an average equivalent length of 0.292 m.

목차

Abstract
1. 서론
2. 연구방법
3. 결과분석
4. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

최근 본 자료

전체보기

댓글(0)

0