메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
윤범열 (연세대학교) 최지용 (연세대학교) 육현성 (연세대학교) 김수민 (연세대학교)
저널정보
대한설비공학회 대한설비공학회 학술발표대회논문집 대한설비공학회 2024년도 동계학술발표대회 논문집
발행연도
2024.11
수록면
556 - 559 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This study sets up a zone-construction combination by constructing walls based on the classification of climates classified according to Korea's energy saving design standards and the heat paring rate standard of the wall. There are four climatic divisions, C1, C2, S, and J, and we have used representative climate data for each climate. The target building was a residential apartment, which is the main residential type of large cities in Korea and the world. In the set combination, PCM of TES system is placed indoors, and applied PCM is n-hexadecane, n-heptadecane, n-octadecane with phase change temperature of 20-28 ℃ corresponding to room temperature standard. Each PCM is set at 0.1% to 0.9% of the area of the building. We used Energy Plus 8.7, a building energy simulation, and analyzed the energy saving and economic efficiency of the building. Saved energy was 2.71% on average and we were able to save up to 4.56%. In addition, we conducted an economic analysis, saving an average of 3.42% and saving up to 7.48%.

목차

Abstract
1. 서론
2. 연구방법
3. 리트로핏 기술별 건물에너지소요량 결과
4. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-151-25-02-092128409