지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2024.7
- 수록면
- 2,859 - 2,874 (16page)
- DOI
- 10.1016/j.net.2024.02.049
이용수
초록· 키워드
오류제보하기
This paper presents the finite element deformation and failure simulation of a typical Korean high-power reactor vessel under a severe accident characterized by large break loss of coolant (LBLOCA) with in-vessel retention of molten corium through external reactor vessel cooling (IVR-ERVC) conditions. Temperature distributions calculated using Modular Accident Analysis Program Version 5 (MAAP5) as thermal boundary conditions were used, and ABAQUS thermal and structural analyses were performed. After full ablation, the temperature of the inner surface in the thinnest section remained high (920 ◦C), but the stress remained relatively low (less than 6 MPa). At the outer surface, the stress was as high as 250 MPa; however, the resulting plastic strain was small owing to the low temperature of 200 ◦C. Variations in stress, inelastic strain, and temperature with time in the thinnest section suggest that the plastic and creep strains are saturated owing to stress relaxation, resulting in low cumulative damage. Thus, the lower head of the vessel can maintain its structural integrity under LBLOCA with IVR-ERVC conditions. The sensitivity analysis of internal pressure indicates the occurrence of failure in the thinnest section at an internal pressure >9.6 MPa via local necking followed by failure due to high stresses.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
IVR-ERVC 조건 하 원자로 압력용기의 변형 거동 예측을 위한 재료의 인장 물성 구성 방정식 변수 결정
대한기계학회 춘추학술대회
2021 .11
-
EVALUATION OF HEAT-FLUX DISTRIBUTION AT THE INNER AND OUTER REACTOR VESSEL WALLS UNDER THE IN-VESSEL RETENTION THROUGH EXTERNAL REACTOR VESSEL COOLING CONDITION
Nuclear Engineering and Technology
2015 .01
-
RPI모형을 이용한 ULPU-V시험의 수치모사
한국안전학회지
2017 .01
-
Corium Weight Effect on the RPV Lower-head during Severe Accident Condition
대한기계학회 춘추학술대회
2019 .11
-
유한요소해석을 이용한 100L-700MPa 급 초고압용기 설계 기법 개발
한국정밀공학회 학술발표대회 논문집
2019 .05
-
단열재 조건에 따른 원자로용기 외벽냉각 성능 예비분석
한국압력기기공학회 논문집
2023 .06
-
설계방식에 따른 초고압 반응용기의 구조적 특성에 관한 연구
한국정밀공학회 학술발표대회 논문집
2018 .05
-
Study on Prediction of Failure Behavior of Composite Pressure Vessel Using Explicit Finite Element Analysis
한국철도학회 논문집
2024 .09
-
Event/accident Simulation Model of the Reactor Pressure Vessel Internal Segmentation Activity
한국방사성폐기물학회 학술대회
2019 .01
-
최적화 설계를 통한 혼합가스 성능시험용 고온 고압 용기의 제작
한국기계가공학회지
2019 .11
-
Vessel failure sensitivities of an advanced reactor for SBLOCA
Nuclear Engineering and Technology
2020 .01
-
Wire-winding 기법으로 제작된 고압용기의 유한요소 해석
대한기계학회 춘추학술대회
2018 .12
-
Round robin analysis of vessel failure probabilities for PTS events in Korea
Nuclear Engineering and Technology
2020 .08
-
Can a nanofl uid enhance the critical heat flux if the recirculating coolant contains debris?
Nuclear Engineering and Technology
2022 .05
-
100L-700MPa급 초고압 용기 설계 기술 개발
한국기계가공학회지
2019 .08
-
Investigation of seismic responses of reactor vessel and internals for beyond-design basis earthquake using elasto-plastic time history analysis
Nuclear Engineering and Technology
2021 .03
-
Segmentation and Packaging Plan for the Reactor Pressure Vessel
한국방사성폐기물학회 학술대회
2017 .01
-
PGSFR 소듐냉각고속로 원자로용기 설계 및 구조건전성 평가
한국압력기기공학회 논문집
2016 .06
-
An interactive multiple model method to identify the in-vessel phenomenon of a nuclear plant during a severe accident from the outer wall temperature of the reactor vessel
Nuclear Engineering and Technology
2021 .02
-
유사도 분석을 이용한 콜센터 IVR 초기 서비스 추천에 관한 연구
한국정보기술학회논문지
2019 .04
최근 본 자료
댓글(0)
0