메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
조영태 (Jeonju University) 최형철 (Kunjang University College)
저널정보
한국생산제조학회 한국생산제조학회지 한국생산제조학회지 Vol.34 No.1
발행연도
2025.2
수록면
34 - 40 (7page)
DOI
10.7735/ksmte.2025.34.1.34

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Delay in cooling and temperature control failure occurs owing to the thermal dissipation issues in a product during mass production. Hence, a comparative evaluation of cooling performance was conducted on four types of heat sinks: the initially applied foreign heat sink (No. 2), domestically produced heat sink that experienced cooling deficiencies during mass production (No. 1), and two newly designed heat sinks (No. 3 and 4). No. 3 and 4 were modified by adjusting the spacing and length of the fins through slight changes in fin height, thickness, and number, resulting in variation in weight compared to that of No. 2. This helped in identifying the issues in No. 1. The two newly designed heat sinks demonstrated excellent cooling performance and weight reduction of approximately 10% compared to that of No. 2. Ultimately, No. 4 was selected as the final production model.

목차

ABSTRACT
1. 서론
2. 열전소자 유닛 적용 정수기 냉수통
3. 냉수통 냉각 테스트 및 고찰
4. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-151-25-02-092294999