메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
이상민 (공주대학교) 이사랑 (공주대학교) 홍석무 (공주대학교)
저널정보
한국소성·가공학회 소성·가공 소성가공 제34권 제2호(통권 제216호)
발행연도
2025.4
수록면
70 - 78 (9page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Digital Image Correlation (DIC) has emerged as a reliable alternative to conventional extensometers in uniaxial tensile testing, offering full-field strain measurement regardless of specimen geometry or fracture location. While 3D DIC systems provide high accuracy using dual-camera setups, they require complex calibration and are costly. On the other hand, 2D DIC offers a simpler and more affordable approach but suffers from out-of-plane deformation errors due to its single-camera limitation. To mitigate these errors, this study introduces a plane strain specimen that restricts transverse deformation during tensile testing. Stress–strain curves were obtained under biaxial stress conditions, and a conversion method was proposed to derive equivalent stress and strain from longitudinal measurements, incorporating plane strain theory and plastic flow rules. The proposed approach was validated through tensile simulation, showing a deviation of approximately 2.6% compared to conventional methods. This demonstrates that the method effectively complements the limitations of 2D DIC and enhances its capability to approximate 3D-level accuracy in strain measurement.

목차

Abstract
1. 서론
2. 평면 변형 시편과 단축 인장 시험
3. 평면 변형 시편을 이용한 유효 응력-유효 변형률 계산
4. 결과
5. 결론
REFERENCES

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0