메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
김태양 (영남대학교) 김효준 (비텍) 이진현 (영남대학교) 이한결 (영남대학교) 조영흠 (영남대학교)
저널정보
한국태양에너지학회 한국태양에너지학회 논문집 한국태양에너지학회 논문집 제45권 제2호
발행연도
2025.4
수록면
23 - 32 (10page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The study aim was to derive optimal operating conditions by considering the initial indoor load and energy efficiency of an electric heat pump (EHP) system. In this study, the set temperature and supply air volume were classified by case, and a comparative analysis was conducted after calculating the cooling capacity, recommended temperature arrival time, power consumption, energy consumption, and Coefficient of Performance (COP) under different operating conditions. An experiment was conducted in which the target space was selected and a sensor was used to measure the indoor temperature. Further, a hot wire anemometer was installed at the inlet of the evaporator outlet to measure the discharge wind speed. To measure the refrigerant temperature change, thermocouples were attached to the inlet and outlet pipes of the evaporator and condenser. The study findings revealed that operating the EHP system by setting the temperature low and supply air volume large until the recommended temperature was reached was the driving method that quickly eliminated the initial indoor load and consumed the least energy.

목차

Abstract
1. 서론
2. EHP 시스템 냉방 능력 및 성능계수
3. 실험개요
4. EHP 운전조건에 따른 실험 결과 및 분석
5. 결론
REFERENCES

참고문헌 (0)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0