메뉴 건너뛰기
소속 기관 / 학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
(Kagoshima University)
저널정보
한양대학교 청정에너지연구소 Journal of Ceramic Processing Research Journal of Ceramic Processing Research 제5권 제1호
발행연도
수록면
84 - 88 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
이 논문의 연구방법이 궁금하신가요?
🏆
연구결과
이 논문의 연구결과가 궁금하신가요?
AI에게 요청하기
추천
검색

초록· 키워드

This paper reports the preparation, microstructures and electrical properties of a Ni (55 vol%)/Sm-doped ceria cermet. Anickel powder of median size 14 μm or a NiO powder of median size 2.5 μm was mixed with Sm-doped ceria (SDC) powder(median size 0.87 μm) with a composition of Ce0.8Sm0.2O1.9, which was produced by the calcination of an oxalate solid solution(Ce0.8Sm0.2)2(C2O4)3 at 600캜. The mixtures of Ni/SDC (sample A) and NiO/SDC (sample B) were sintered at 1300 캜 in air to a relative density of 58.6% and 97.3%, respectively. During the sintering of the cermet, the Ni powder was oxidized to NiO in sample A. The NiO component in the as-sintered cermet was reduced to Ni in a H2-H2O atmosphere of an oxygen partialpressure ~10.20 atm at 700캜. Both the cermets showed a high stability of high electronic conduction to 100 h of heating at700캜 in a low oxygen partial pressure atmosphere. Sample A with large Ni particles was too brittle to handle after the heating. Sintering of the fine Ni grains in sample B proceeded at 700C
상세정보 수정요청해당 페이지 내 제목·저자·목차·페이지
정보가 잘못된 경우 알려주세요!

목차

등록된 정보가 없습니다.

참고문헌

참고문헌 신청

최근 본 자료

전체보기