인문학
사회과학
자연과학
공학
의약학
농수해양학
예술체육학
복합학
지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 한양대학교 청정에너지연구소 Journal of Ceramic Processing Research Journal of Ceramic Processing Research 제10권 제4호
- 발행연도
- 2009.8
- 수록면
- 567 - 570 (4page)
이용수
초록· 키워드
ZrO2 ceramic/stainless steel joints were fabricated by pressureless brazing using a Ag-Cu filler metal and a TiH2 powder precoating.
The microstructure and microchemistry of the joint cross section were characterized and analyzed by means of
scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). The effects of brazing conditions on the joint
shear strength were also investigated. The results showed that there existed three zones with distinct microstructural
differences crossing the brazing interlayer. A reaction layer and a Ti-rich sublayer were formed at the ZrO2/filler interface.
The influence of the brazing temperature on the joint strength was more remarkable than that of the holding time. In the
experimental condition ranges, the joint strength first increased, and the maximum shear strength was over 90MPa with the
optimized condition. Most of the joint fractures developed in the ceramic matrix near the ceramic/filler interface.
#Brazing
#Brazing
#Zirconia
#Zirconia
#Microstructure
#Microstructure
#Interface
#Interface
#Mechanical Properties
#Mechanical Properties
상세정보 수정요청해당 페이지 내 제목·저자·목차·페이지정보가 잘못된 경우 알려주세요!
목차
등록된 정보가 없습니다.