인문학
사회과학
자연과학
공학
의약학
농수해양학
예술체육학
복합학
DBpia AI
AI 에이전트
AI 아이디어
AI 리더
AI 뷰어
Citeasy
크롬 서지관리 다운로드
지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
피인용 0
초록·키워드
Accurate prediction of ship hydrodynamic performance is essential for hull form optimization during the early design stage. This study investigates two approaches for incorporating ship hull geometry into machine learning-based surrogate models using offset data. The first approach represents hull geometry as an RGB image and applies a two-dimensional convolutional neural network (2D CNN), while the second directly utilizes offset curves with a one-dimensional CNN and a temporal convolutional network (1D CNN + TCN) to capture longitudinal hull form variations. Models for predicting the residual resistance coefficient, effective wake fraction, and thrust deduction factor were trained using approximately 440 model test dataset from the Korea Research Institute of Ships and Ocean Engineering (KRISO). Their performance was compared with a baseline multilayer perceptron (MLP) model using only principal ship dimensions. The results demonstrate that incorporating hull geometry significantly improves prediction accuracy over the MLP model. Although the average prediction performance of the 2D CNN and 1D CNN + TCN models was similar, the 1D CNN + TCN model achieved higher hull form sensitivity in propulsion performance prediction. These results indicate that offset-based hull representation provides an effective input for machine learning surrogate models and that TCN-based architectures are advantageous for capturing longitudinal hull form variations.
본문·목차
인공지능 문자 인식 모델을 통해 추출된 텍스트로, 일부 오타나 오류가 포함될 수 있으나 지속적으로 개선 중입니다.
오류를 발견하셨다면 해당 부분을 드래그한 후 ' 를 통해 신고해주세요.
오류를 발견하셨다면 해당 부분을 드래그한 후 ' 를 통해 신고해주세요.
최근 본 자료 전체보기
