인문학
사회과학
자연과학
공학
의약학
농수해양학
예술체육학
복합학
DBpia AI
AI 에이전트
AI 아이디어
AI 리더
AI 뷰어
Citeasy
크롬 서지관리 다운로드
지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
피인용 0
초록·키워드
Industrial waste heat discharged from paper drying processes is carried by high-temperature, high-humidity air with a large water vapor content and thus offers significant potential for both sensible and latent heat recovery. In practical applications, however, the airflow rate is typically high, and the resulting reduction in air contact time may limit condensation and, consequently, latent heat recovery. Whether condensation-dominant heat transfer persists under such high-flow conditions has not yet been sufficiently verified. In this study, experiments were conducted on a pillow-plate heat exchanger under operating conditions measured in an actual paper manufacturing process, with humid air inlet temperatures of 58-72℃ and relative humidities of 60-80%. The cooling water inlet temperature was maintained below the dew point of the humid air to ensure continuous condensation. The airflow rate was varied from 200 to 600 m³/h, corresponding to air-side Reynolds numbers of approximately 1.3×10³ to 3.9×10³. The effects of the airflow rate on the condensate mass flow rate, the latent heat transfer rate, and the latent heat contribution to the total heat transfer were systematically investigated. The condensate mass flow rate increased consistently with the airflow rate, and the latent heat transfer rate varied approximately linearly with the condensate mass flow rate. Despite the nearly threefold increase in the airflow rate, the latent heat contribution remained at 78-84% of the total heat transfer. These results indicate that, although the contact time decreases at higher airflow rates, the enhanced air-side heat and mass transfer compensates for this effect, such that the condensation-dominant heat transfer structure does not collapse even under high-velocity flow conditions.
본문·목차
인공지능 문자 인식 모델을 통해 추출된 텍스트로, 일부 오타나 오류가 포함될 수 있으나 지속적으로 개선 중입니다.
오류를 발견하셨다면 해당 부분을 드래그한 후 ' 를 통해 신고해주세요.
오류를 발견하셨다면 해당 부분을 드래그한 후 ' 를 통해 신고해주세요.
최근 본 자료 전체보기
