인문학
사회과학
자연과학
공학
의약학
농수해양학
예술체육학
복합학
DBpia AI
AI 에이전트
AI 아이디어
AI 리더
AI 뷰어
Citeasy
크롬 서지관리 다운로드
지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
초록·키워드
Abstract Seismic retrofit has always been a very important subject in recent years. However, typical retrofit techniques such as load‐resisting systems, damper devices, and seismic isolation systems will cause considerable disturbances to the structural system, such as increased force demand, and the building's occupants will need to be temporarily relocated during the construction. A design of the low‐disturbance retrofit method for steel column bases that uses the advantages of the curved member has been proposed in the study to improve seismic performance and reduce the mentioned demerits above. The basic mechanism of the curved member retrofit system was first analytically evaluated by preliminary modeling, followed by a parametric study to verify the effective shape. Four curved member specimens were tested with variations in fabrication processes and boundary conditions. Several aspects, including overall behavior, strength backbones, and deformation shapes of the specimens, were examined upon measured responses. The hysteretic performance of the curved member retrofit system is verified to achieve a stable cyclic behavior with limited strength degradation. A set of physical equations for estimating the lateral loads were established and verified by developing numerical models with a good agreement that enabled them to accurately represent the measured responses in the test.
인공지능 문자 인식 모델을 통해 추출된 텍스트로, 일부 오타나 오류가 포함될 수 있으나 지속적으로 개선 중입니다.
오류를 발견하셨다면 해당 부분을 드래그한 후 ' 를 통해 신고해주세요.
오류를 발견하셨다면 해당 부분을 드래그한 후 ' 를 통해 신고해주세요.
최근 본 자료 전체보기
