메뉴 건너뛰기
소속 기관 / 학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
고객센터 ENG
주제분류

논문 기본 정보

저자정보
출처
EDP Sciences E3S Web of Conferences 477
오류 신고하기
표지

검색

    초록·키워드

    This study aims to demonstrate the feasibility of obtaining wood-polymer composites, which focus on materials that are difficult to recycle. For this purpose, local poplar and pavloniya wood samples, the density of which corresponds to this process, were impregnated with polyvinyl chloride and CaCO3, which form free radicals. Samples were taken using a hot press. Physico-mechanical parameters of the samples were analyzed. Due to the low permeability of the poplar wood showed only increasing values of stiffness parallel and perpendicular to the grain. Undebarked ponderosa pine chips were treated by hot water extraction to modify the chemical composition. In the treated pine (TP), the mass was reduced by approximately 20%, and the extract was composed mainly of degradation products of hemicelluloses. Wood flour produced from TP and unextracted chips (untreated pine, UP) was blended with high-density polyethylene (HDPE) and polypropylene (PP) and was extruded into wood plastic composites (WPCs).

    본문·목차

    최근 본 자료 전체보기