인문학
사회과학
자연과학
공학
의약학
농수해양학
예술체육학
복합학
DBpia AI
AI 에이전트
AI 아이디어
AI 리더
AI 뷰어
Citeasy
크롬 서지관리 다운로드
지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
초록·키워드
The increasing demand for clean water also increases sewage and its sludge by-products. Current challenges of disposing and treating sewage sludge necessitates the development and modification of the material into valuables. The composition and structure of sewage sludge give it the potential to be used as an adsorbent for heavy metal ions removal. This study investigated the performance of three different types of dewatered sludge-based adsorbents prepared with varying methods of activation, consisting of CS (carbonized sludge at 600 o C), CS-NaOH (CS activated with NaOH), and CS-KOH (CS activated with KOH) to remove lead (Pb) from aqueous solution. Adsorption experiments were carried out using synthetic Pb wastewater in a batch system. Several experimental parameters were evaluated, including adsorbent types, contact time, adsorbent dose, pollutant concentration, pH, and competing adsorbates. Adsorption data were analysed using isotherms and kinetics model equations and were found to fit Langmuir and pseudo-second-order models, which suggests that the adsorptive behaviour of CS-NaOH is monolayer chemical sorption and depends on the active surface sites. The study revealed that the highest Pb removal, achieving a 100% removal efficiency, was observed with CS-NaOH adsorbent dose of 1 g/L, initial Pb (II) concentration of 10 mg/L, and a contact time of 120 minutes at pH 6. The presence of cadmium (Cd) and methyl orange (MO) in synthetic wastewater inhibited Pb(II) adsorption efficiency using CS-NaOH, which indicates potential competition between adsorbates. In conclusion, CS-NaOH was revealed as a promising adsorbent for lead removal from water.
인공지능 문자 인식 모델을 통해 추출된 텍스트로, 일부 오타나 오류가 포함될 수 있으나 지속적으로 개선 중입니다.
오류를 발견하셨다면 해당 부분을 드래그한 후 ' 를 통해 신고해주세요.
오류를 발견하셨다면 해당 부분을 드래그한 후 ' 를 통해 신고해주세요.
최근 본 자료 전체보기
