메뉴 건너뛰기
소속 기관 / 학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
고객센터 ENG
주제분류

HIL-시뮬레이션을 통한 차량동역학 모델의 실시간성 검증 Verification of real time simulation of vehicle dynamics model with HIL

논문 기본 정보

저자정보

(부산대학교, 부산대학교 대학원)

발행연도
저작권
부산대학교 논문은 저작권에 의해 보호받습니다.
표지

이용 18

HIL-시뮬레이션을 통한 차량동역학 모델의 실시간성 검증
검색

    초록·키워드

    As life cycles of products are reducing in these days, an efficient development cycle is needed absolutely. So Hardware-in-the-Loop (HIL) simulation has emerged since 1990’s. This concept contains a simulation using hardware, software, and ECU (Electronic Control Unit) at the same time. Suppose a new vehicle is on a development process and several tests are needed. If the vehicle considering whole parts is built and test is executed repeatedly, it would take much time and cost. To solve the problem like this, HIL-simulation can be used. In a development and test, there will be critical parts to be considered specially. So these parts are composed of hardware with ECU (Electronic Controller Unit) and the other things are replaced with software which means codes in HIL. With this kind of combination, much
    time and costs could be saved.
    A possibility of real-time simulation and driving performance of a vehicle dynamics model considering an user interface and extensibility were verified in this paper. The vehicle dynamics model was modularized for both efficiency and user interface. As being used a lumped parameter model concept, an extensibility of vehicle model also can be possible.
    First, a verification of vehicle dynamics model was carried out in Software-In-the-Loop (SIL) environment through a drive test on several tracks with dSPACE known for tool of vehicle design and simulation. Finally, the real-time possibility was confirmed by driving directly with vehicle drive simulator in Hardware-In-the-Loop (HIL).

    목차

    1. 제1장 서 론 1
      1.1 연구배경 및 목적 1
      1.2 논문 내용 1
      제2장 차량동역학모델 3
      2.1 dSPACE 3
      2.2 현가장치 모델링 4
      2.2.1 휠의 상대 운동 정의 5
      2.2.2 시험 기반 차량동역학 모델(EVM) 6
      2.3 타이어 모델링 8
      2.3.1 MF 타이어 9
      2.3.2 슬립률(slip ratio) 11
      2.3.3 수직력(vertical force) 12
      2.4 차량 운동방정식 13
      2.5 현가장치와 휠속도 모듈 15
      2.6 차량동역학 16
      제3장 운전자 모델 18
      3.1 주행경로 생성 18
      3.1.1 B-spline 곡선 18
      3.1.2 개선된 B-spline 곡선 21
      3.2 핸들링 제어 24
      3.2.1 근접 구간 탐색 24
      3.2.2 경로 위 근접점 계산 26
      3.2.3 조향각 생성 알고리즘 27
      3.3 차량속도 제어 28
      3.3.1 최대 주행속도 결정 29
      3.3.2 구동 및 브레이크 토크 결정 33
      제4장 차량 모델의 실시간성 검증 35
      4.1 RT-LAB 35
      4.2 S-function 36
      4.3 차량 모델의 실시간 주행 39
      제5장 차량동역학 시뮬레이션 42
      5.1 SIL-시뮬레이션 42
      5.2 HIL-시뮬레이션 46
      제6장 결 론 51
      참고문헌 53

    최근 본 자료 전체보기