인문학
사회과학
자연과학
공학
의약학
농수해양학
예술체육학
복합학
DBpia AI
AI 에이전트
AI 아이디어
AI 리더
AI 뷰어
Citeasy
크롬 서지관리 다운로드
지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학위논문
- 저자정보
- 발행연도
- 2016
- 저작권
- 서울대학교 논문은 저작권에 의해 보호받습니다.
이용수0
초록· 키워드
상세정보 수정요청해당 페이지 내 제목·저자·목차·페이지정보가 잘못된 경우 알려주세요!
Olefin metathesis (OM) reaction is a facile reaction to synthesize various molecules through carbon-carbon double bond rearrangement. With the development of more reactive yet functional group tolerant catalysts, OM proved its usefulness and became one of the most important reaction in modern organic chemistry. Among the various olefins that can subjected to OM, alkynes have special characteristic. As OM only exchanges carbon-carbon double bonds, reaction between alkyne and metal carbene catalyst does not completely cleave carbon-carbon triple bond: instead, new metal 1,3-dienylidene is formed, which can undergo further metathesis reactions, such as enyne metathesis or conjugated polyene synthesis. This thesis will describe about the various application of OM with alkynes, from synthesis of small molecules to high-molecular-weighted conjugated polyenes.
Chapter 2 describes synthesis of multicyclic compounds through selective tandem dienyne ring-closing metathesis (RCM) reaction and Diels-Alder reaction. Dienyne RCM reaction is a useful reaction to synthesize fused bicyclic compounds, but due to the lack of catalyst selectivity between olefins with same structures, dienyne RCM reaction tend to produce two different isomers with different ring sizes. Also, product of conventional dienyne RCM reaction was restricted to the bicyclic compounds containing small or medium sized rings only. Thus, conformation of 1,3-diene functional group in bicyclic compound was fixed to s-trans conformation, thus further modification such as Diels-Alder reaction was impossible. By modifying the dienyne substrate to contain long tether to synthesize bicyclic compound comprising small (5-7 membered) and large (14-17 membered) rings, both problems could be solved. As cyclization rate of small ring and catalyst exchange rate between alkenes were significantly faster than that of large ring, single isomer could be synthesized from dienyne RCM reaction. Also, due to the flexible macrocycle chain, 1,3-diene functional group could form s-cis conformation, which could undergo Diels-Alder reaction to synthesize multicyclic compound.
Chapter 3 describes tandem ring-opening/ring-closing metathesis (RO/RCM) polymerization of monomers containing cycloalkene and alkyne. Although cycloalkenes with low ring strain and alkynes were not suitable for metathesis polymerization, mixing those two functional groups in one monomer facilitated efficient tandem RO/RCM reaction to perform ultrafast living polymerization. Living characteristic of tandem polymerization could also synthesize block copolymers. Also, 1,3-diene functional groups in the polymer backbone could undergo further modification by cycloadditionr reactions. By changing monomer structures, we found out that monomers with certain combinations of cycloalkene, alkyne, and linker group could undergo efficient polymerization, while monomers with other combinations did not. In order to increase polymerization efficiency, two strategies were proposed. Firstly, monomer structures were modified to increase intramolecular RO/RCM with enhanced Thorpe-Ingold effect, which allowed the synthesis of challenging dendronized polymer. Secondly, reaction concentration was reduced to suppress intermolecular side reactions, which could effectively polymerize monomers without structural modifications. In order to further broaden the monomer scope, monomers containing internal alkynes were also studied, and surprisingly, monomers with internal alkynes tend to undergo non-selective α- and β-addition to form two different polymer units with different ring structures. Further studies revealed that steric and electronic effects of internal alkyne substituents changed polymer unit ratio, polymerization reactivity, and even polymerization kinetics. Thorough mechanism study revealed that the rate-determining step of monomers containing certain internal alkyne was six-membered ring cyclization step via β-addition, whereas that for monomers containing other alkynes was the conventional intermolecular propagation step, as observed in other chain-growth polymerization reactions.
Last chapter describes about fast cyclopolymerization of 1,7-octadiyne derivatives. Although cyclopolymerization was effective for the synthesis of conjugated polyenes, cyclopolymerization of 1,7-octadiyne was rarely studied, due to the slow polymerization rate by slow six-membered ring cyclization rate. Although this polymerization rate could be increased by using bulky substituents in side chains, simply increasing substituent bulkiness could not effectively increase polymerization rate. Thus, we proposed two strategies to increase polymerization rate. Firstly, dimethyl substitution was introduced to α-position of side chains. This strategy effectively increased polymerization rate by enhanced Thorpe-Ingold effect, and synthesis of 50-mer polymer could be done within 1 hour, instead of previous 24 hours. However, in order to achieve controlled polymerization, reaction temperature should be decreased and polymerization time was increased to 6 hours. To solve this problem, second strategy was applied: by changing substituent position from 4,4-disubstitution to 4,5-disubstitution, polymerization rate was significantly increased, and even living polymerization with narrow PDI and well-predictable molecular weight was possible within 1 hours, and even challenging synthesis of dendronized polymer could be possible. All those polymers were analyzed by UV-Vis, NMR, and IR spectroscopy to observe polymer backbone structures, such as conjugation length of polymer and cis/trans conformation of polymer backbone.
Chapter 2 describes synthesis of multicyclic compounds through selective tandem dienyne ring-closing metathesis (RCM) reaction and Diels-Alder reaction. Dienyne RCM reaction is a useful reaction to synthesize fused bicyclic compounds, but due to the lack of catalyst selectivity between olefins with same structures, dienyne RCM reaction tend to produce two different isomers with different ring sizes. Also, product of conventional dienyne RCM reaction was restricted to the bicyclic compounds containing small or medium sized rings only. Thus, conformation of 1,3-diene functional group in bicyclic compound was fixed to s-trans conformation, thus further modification such as Diels-Alder reaction was impossible. By modifying the dienyne substrate to contain long tether to synthesize bicyclic compound comprising small (5-7 membered) and large (14-17 membered) rings, both problems could be solved. As cyclization rate of small ring and catalyst exchange rate between alkenes were significantly faster than that of large ring, single isomer could be synthesized from dienyne RCM reaction. Also, due to the flexible macrocycle chain, 1,3-diene functional group could form s-cis conformation, which could undergo Diels-Alder reaction to synthesize multicyclic compound.
Chapter 3 describes tandem ring-opening/ring-closing metathesis (RO/RCM) polymerization of monomers containing cycloalkene and alkyne. Although cycloalkenes with low ring strain and alkynes were not suitable for metathesis polymerization, mixing those two functional groups in one monomer facilitated efficient tandem RO/RCM reaction to perform ultrafast living polymerization. Living characteristic of tandem polymerization could also synthesize block copolymers. Also, 1,3-diene functional groups in the polymer backbone could undergo further modification by cycloadditionr reactions. By changing monomer structures, we found out that monomers with certain combinations of cycloalkene, alkyne, and linker group could undergo efficient polymerization, while monomers with other combinations did not. In order to increase polymerization efficiency, two strategies were proposed. Firstly, monomer structures were modified to increase intramolecular RO/RCM with enhanced Thorpe-Ingold effect, which allowed the synthesis of challenging dendronized polymer. Secondly, reaction concentration was reduced to suppress intermolecular side reactions, which could effectively polymerize monomers without structural modifications. In order to further broaden the monomer scope, monomers containing internal alkynes were also studied, and surprisingly, monomers with internal alkynes tend to undergo non-selective α- and β-addition to form two different polymer units with different ring structures. Further studies revealed that steric and electronic effects of internal alkyne substituents changed polymer unit ratio, polymerization reactivity, and even polymerization kinetics. Thorough mechanism study revealed that the rate-determining step of monomers containing certain internal alkyne was six-membered ring cyclization step via β-addition, whereas that for monomers containing other alkynes was the conventional intermolecular propagation step, as observed in other chain-growth polymerization reactions.
Last chapter describes about fast cyclopolymerization of 1,7-octadiyne derivatives. Although cyclopolymerization was effective for the synthesis of conjugated polyenes, cyclopolymerization of 1,7-octadiyne was rarely studied, due to the slow polymerization rate by slow six-membered ring cyclization rate. Although this polymerization rate could be increased by using bulky substituents in side chains, simply increasing substituent bulkiness could not effectively increase polymerization rate. Thus, we proposed two strategies to increase polymerization rate. Firstly, dimethyl substitution was introduced to α-position of side chains. This strategy effectively increased polymerization rate by enhanced Thorpe-Ingold effect, and synthesis of 50-mer polymer could be done within 1 hour, instead of previous 24 hours. However, in order to achieve controlled polymerization, reaction temperature should be decreased and polymerization time was increased to 6 hours. To solve this problem, second strategy was applied: by changing substituent position from 4,4-disubstitution to 4,5-disubstitution, polymerization rate was significantly increased, and even living polymerization with narrow PDI and well-predictable molecular weight was possible within 1 hours, and even challenging synthesis of dendronized polymer could be possible. All those polymers were analyzed by UV-Vis, NMR, and IR spectroscopy to observe polymer backbone structures, such as conjugation length of polymer and cis/trans conformation of polymer backbone.
목차
- Chapter 1. Olefin metathesis reaction with alkyne 1Brief history of olefin metathesis with alkyne 3Thesis research 9References 10Chapter 2. Synthesis of fused multicyclic compound through dienyne ring-closing metathesis and Diels-Alder reaction 13Abstract 15Background 15Introduction 18Results and Discussions 19Conclusion 35References 36Chapter 3. Tandem ring-opening/ring-closing metathesis polymerization 39Abstract 41Background 42Part A. Tandem RO/RCM of monomers containing nitrogen linker group 45Introduction 45Results and Discussions 46Conclusion 61Part B. Strategies and deeper mechanistic study of monomers with low reactivity 62Introduction 62Results and Discussions 62Conclusion 82References 83Chapter 4 Fast diyne cyclopolymerization of 1,7-octadiynes 87Abstract 89Backgrounds 89Part A. Cyclopolymerization of 1,7-octadiynes containing dimethyl substituents in α-position of side chain 93Introduction 93Results and Discussions 95Conclusion 104Part B. Cyclopolymerization of 4,5-disubstituted 1,7-octadiyne 106Introduction 106Results and Discussions 107Conclusion 120References 120Supporting Information 123국문 초록 135
최근 본 자료
