메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2002년 춘계학술대회논문집
발행연도
2002.5
수록면
2,075 - 2,080 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (4)

초록· 키워드

오류제보하기
Under the same induction heating power histories, two tests named as KNGR-SUS-DRY and KNGR-SUS-EXT
were performed varying the cooling conditions at the outer surface of the lower head vessel. The maximum heat flux
imposed to the inner surface of the lower head vessel was about 0.35 MW/m2 in both the tests. In the KNGR-SUS-DRY
test performed without the external vessel cooling, the inner surface of the lower head vessel was ablated by the
thickness of 45 mm, which indicated the total ablation of the welding material. Although the welding material was
ablated in all, the penetration tube was not ejected outside the lower head vessel due to the thermal expansion of the
lower head vessel and the penetration tube. In the KNGR-SUS-EXT test performed with the external vessel cooling,
however, the thickness of the ablation is about 10 mm at most.

목차

Abstract

1. 서론

2. 실험 내용

3. 실험 결과

4. 실험 결과 분석

5. 결론

후기

참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-550-014201950