지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 대한기계학회 Journal of Mechanical Science and Technology Journal of Mechanical Science and Technology Vol.19 No.10
- 발행연도
- 2005.10
- 수록면
- 1,875 - 1,884 (10page)
이용수
초록· 키워드
오류제보하기
This paper discusses Neural Networks as predictor for analyzing of transmission angle of slider-crank mechanism. There are different types of neural network algorithms obtained by using chain rules. The neural network is a feedforward neural network. On the other hand, the slider-crank mechanism is a modified mechanism by using an additional link between connecting rod and crank pin. Through extensive simulations, these neural network models are shown to be effective for prediction and analyzing of a modified slider-crank mechanism’s transmission angle.
목차
Abstract
1. Introduction
2. Modified Slider - crank Mechanism
3. Feedforward Neural Network
4. Simulation Results and Discussion
5. Conclusions
Acknowledgments
References
참고문헌 (11)
참고문헌 신청
Attia, H. A., 2003, "Kinematic Analysis of the Multi-Link Five-Point Suspension System in Point Coordinates," KSME International Journal, Vol.17, pp.1133~1139.
Canbulut, F., Sinanoglu, C. and Yildirim, S., 2004, "Analysis of Effects of Sizes of Orifice and Pockets on the Rigidity of Hydrostatic Bearing Using Neural Network Predictor System," KSME International Journal, Vol.18, pp.432~442.
Choi, K. B, 2003, "Kinematic Analysis and Optimal Design of 3-PPR Planar Parallel Manipulator," KSME International Journal, Vol.17, pp.528~537.
Hamilton, H. M. and Charles, F. R., 1987. Mechanisms and Dynamics of Machinery, John Wiley & Sons, Canada.
Kim, J. K. and Jung, J. Y., 2003, "Driving Mechanism of Tapered Pistons in Bent-Axis Design Axial Piston Pumps," KSME International Journal , Vol.17, pp.181~186.
Canbulut, F., Sinanoglu, C. and Yildirim, S., 2004, "Analysis of Effects of Sizes of Orifice and Pockets on the Rigidity of Hydrostatic Bearing Using Neural Network Predictor System," KSME International Journal, Vol.18, pp.432~442.
Choi, K. B, 2003, "Kinematic Analysis and Optimal Design of 3-PPR Planar Parallel Manipulator," KSME International Journal, Vol.17, pp.528~537.
Hamilton, H. M. and Charles, F. R., 1987. Mechanisms and Dynamics of Machinery, John Wiley & Sons, Canada.
Kim, J. K. and Jung, J. Y., 2003, "Driving Mechanism of Tapered Pistons in Bent-Axis Design Axial Piston Pumps," KSME International Journal , Vol.17, pp.181~186.
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Self-Tuning Control for Ratational Speed of Slider-Crank Mechanism
제어로봇시스템학회 국제학술대회 논문집
2009 .08
-
Crank Angle Analysis
한국소음진동공학회 학술대회논문집
2001 .11
-
크랭크 메커니즘을 이용한 연속적인 점프 수행을 위한 로봇의 다리 개발
한국정밀공학회 학술발표대회 논문집
2011 .06
-
A Design Method of Model Following Control System using Neural Networks
제어로봇시스템학회 국내학술대회 논문집
2000 .10
-
A Design Method of Model Following Control System using Neural Networks
제어로봇시스템학회 국내학술대회 논문집
2000 .10
-
A Note on the Results of Neural Data Processing in Some Neural Network System
대한전자공학회 학술대회
1991 .01
-
Human performance models using neural network
대한인간공학회지
1996 .12
-
Fire detection using neural network
제어로봇시스템학회 국제학술대회 논문집
2006 .10
-
Neural Network를 이용한 제어기 설계
대한전기학회 학술대회 논문집
1989 .07
-
Design on the Neural Network Knowledge Base
ICEIC : International Conference on Electronics, Informations and Communications
1995 .01
-
Design on the neural network knowledge base
ICEIC : International Conference on Electronics, Informations and Communications
1995 .08
-
Introduction to Neural Networks
대한전자공학회 단기강좌
1989 .01
-
Neural Networks Research in China
대한전자공학회 세미나
1994 .01
-
Adaptive Higher Order Neural Networks
ITC-CSCC :International Technical Conference on Circuits Systems, Computers and Communications
1998 .01
-
D / A and A / D Conversions Using Neural Networks
JTC-CSCC : Joint Technical Conference on Circuits Systems, Computers and Communications
1991 .01
-
On Learning Control using Neural Networks
제어로봇시스템학회 국내학술대회 논문집
1991 .10
-
On Learning Control Using Neural Networks
대한전자공학회 학술대회
1991 .01
-
PERFORMANCE OF DIGITAL NEURAL NETWORKS
JTC-CSCC : Joint Technical Conference on Circuits Systems, Computers and Communications
1989 .01
-
연구과제별 Neural Networks의 현황 ( Research Topic Oriented Survey of Neural Networks )
대한전자공학회 학술대회
1991 .01
-
A Prediction of the Uzbekistan’s Population Growth using Artificial Neural Networks
Proceedings of KIIT Conference
2018 .06
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2009-550-018240684