메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
대한설비공학회 대한설비공학회 학술발표대회논문집 대한설비공학회 1997년도 동계학술발표회 논문집
발행연도
1997.11
수록면
390 - 395 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (6)

초록· 키워드

오류제보하기
These days heat pipe typed cooling units have been widely applied to power controllers for railway substations to remove heat from power semiconductors(diodes or thyristor). The cooling units consist of a copper heating block for mounting the thyristor, 2~3 heat pipes and large number of aluminum Ems. The present study was to get fundamental informations over structure, design parameters and heat transfer performances of such a cooling unit. Series of operational test for a unit with 3 heat pipes were performed and its heat flow circuit was analysed from experimentally obtained data on wall temperature distribution. Its total resistance was ranged 0.02~0.03℃/W for a power 40W<Q<400W. The time, collapsed to get start the heat pipe, was approximately 17sec, and the wall superheat to initiate nucleation on the heated surface was about 30℃.

목차

Abstract

1. 서론

2. 열파이프식 냉각장치의 구조와 열회로 경로

3. 실험 장치 및 실험 방법

4. 결과 및 고찰

5. 결론

후기

참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-553-015391045