메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
대한설비공학회 대한설비공학회 학술발표대회논문집 대한설비공학회 1998년도 하계학술발표회 논문집(Ⅱ)
발행연도
1998.6
수록면
499 - 503 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
H-X-T (enthalpy-concentration-temperature) diagram of the working fluid is essential for the optimum design of absorption heat pumps and chillers. One typical procedure is to use the differential heat of dilution and solution between refrigerant and absorbent and heat capacity of the working fluid. The other procedure is to use the vapor pressure and the heat capacity of the working fluid when only one volatile component is contained. However, for the lithium bromide-based working fluid system containing organic component as absorbent, it is hard to measure the differential heat of solution because the absorbent is a mixture of salt and organic. The procedure using vapor pressure must have a certain level of deviation from the true values because another volatile organic component is contained in the working fluid. In this study the widely applicable and accurate method for constructing the H-T-X diagram is newly proposed in order to overcome the limitations appearing internally in the typical procedure. This method needs the differential heat of dilution and the heat capacity of the working fluid. For a newly proposed working fluid system, the differential heat of dilution and the heat capacity were measured using an isoperibol solution calorimeter (CSC 4300).

목차

Abstract

1. 서론

2. 엔탈피계산 과정

3. 실험

4. 엔탈피 계산결과

5. 결론

참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-553-015394995