메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2006년도 춘계학술대회 강연 및 논문 초록집
발행연도
2006.6
수록면
1,994 - 1,998 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The evaporators (EVA) in showcases should be defrosted. The showcases consume additional electric power due to temperature rise inside the showcases during defrosting EVA. Therefore it demands to develop the frostless direct contact liquid cooling module substituting for EVA. In the study, four nozzle plates, 5×16 nozzles of 1.5 ㎜ I.D. and 4×15 nozzles of 2 ㎜ I.D. with the same heat transfer area were manufactured as the aligned and staggered array, respectively. Performance of the nozzle plates was investigated on various inlet air mass flow rates at 24℃ with the same mass flow rate of an antifreezing solution at -10℃ in an air flow channel. As the results, while, performance of the plate for 4×15 nozzles of 2.0 ㎜ I.D. with staggered array was worst, those of the others were similar. The effect on the aligned array for only 2.0 ㎜ I.D. was better than that on the staggered array. Furthermore heat transfer coefficients increased for all plates on increasing air mass flow rates.

목차

Abstract
1. 서론
2. 실험장치
3. 실험 방법
4. 실험 결과 및 토론
5. 결론
후기
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-550-016799404