메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2007도 추계학술대회 강연 및 논문 초록집
발행연도
2007.10
수록면
7 - 12 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Electrical Discharge Drilling(ED Drilling) is one of the most productive drilling processes to form deep holes in electrically conductive materials. The rotating tube electrode can dig holes with depth-to-diameter ratio of 150 to 1, or more. Pressurized dielectric water is supplied through the electrode to flush out debris from the hole that is being drilled. The flushing capability of the ED drilling machine is the key factor for the deep hole drilling, despite of high EWR (Electrode Wear Ratio) of the process comparing to the one of plunge type EDM. The high EWR brings a difficulty of the process monitoring, particularly drilling for a selective penetration against multi-layered narrow gap. For this specific drilling job, in this study, an oscilloscope was employed to trace its voltage change during the drilling. The voltage curve appeared to be enough to distinguish each stage of drilling, such as positioning to drilling spot, digging through base material, and finishing of the hole.

목차

Abstract
1. 서론
2. 실험
3. 실험결과
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-550-016064513