메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
Recently, the robustness against daily impact is important according to portablization and downsizing of mobile electronics. Especially, almost parts of cellular phone should undergo drop test when they fall 1.5 m above ground. This test simulates the case when cellular phone slips through user’s fingers while he is talking on the phone. This paper studies a drop test of auto focusing (AF) actuator for camera module in cellular phone. This component is composed of voice coil motor (VCM) as an actuator and leaf spring as a guide and suspension. The leaf spring’s deformation is essential for the test because its permanent distortion disables the focusing, and then, a high quality photograph cannot be obtained. Up to now the drop test has been carried out after fabricating real AF actuator. We propose a dropt test model which simulates the drop test based on finite element analysis. This model makes us enable investigate the stress acting on the clamping and curved parts of leaf spring. Stress over Von Mises criterion lets the spring deformed permanently, and then AF actuator malfunctioned. It helps us to design and modify AF actuator without manufacturing the real product. And also, it saves the time and cost for the development of new products.

목차

Abstract
1. 서론
2. 이론적 배경
3. 마이크로 인장 시험
4. 모사대상 충격시험
5. 유한요소해석
6. 결론
후기
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-552-014790672