메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
Korean Society for Precision Engineering Journal of the Korean Society for Precision Engineering 한국정밀공학회지 Vol.26 No.6
발행연도
2009.6
수록면
50 - 58 (9page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Micro laser fabrication techniques can potentially be used for the manufacture of microstructures on the thin flat surfaces with large diameter that are frequently used in semiconductor industries. However, the large size of wafers can cause the degraded machining accuracy of the surface because it can be tilted or distorted by geometric errors of machines or the holding fixtures, etc. To overcome these errors the off-line focusing error compensation method is proposed. By using confocal autofocus system, the focusing error profile of machined surface is measured along the pre-determined path and can be compensated at the next machining process by making the corrected motion trajectories. The experimental results for silicon wafers and invar flat surfaces show that the proposed method can compensate the focusing error within the level of below 6.9 μm that is the depth of focus required for the laser micromachining process.

목차

1. 서론
2. 공초점 자동초점장치를 이용한 오프라인 초점오차 보상
3. 오프라인 초점오차 보상 실험
4. 결론
후기
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-555-018345249