메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
전력전자학회 ICPE(ISPE)논문집 ICPE 2011-ECCE Asia
발행연도
2011.5
수록면
1,921 - 1,928 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Interior PM machines equipped with fractional-slot concentrated-windings are good candidates for high-speed traction applications. This is mainly due to the higher power density and efficiency that can be achieved. The main challenge with this type of machines is the high rotor losses at high speeds/frequencies. This paper will thoroughly investigate the effect of number of winding layers on the performance of this type of machines. It will be shown that by going to higher number of layers, there can be significant improvement in efficiency especially at high speeds mainly due to the reduction of the winding factor/magnitude of the most dominant stator mmf sub-harmonic component. It will also be shown that there is significant improvement in torque density. Even though there is reduction in the winding factor of the stator synchronous torque-producing mmf component, this is more than offset by increase in machine saliency and reluctance torque. The paper will provide general guidelines regarding the optimum spp combinations based on torque density and efficiency. Sample designs of various slot/pole combinations are used to quantify the benefit of going to higher number of layers in terms of torque density, efficiency and torque ripple.

목차

Abstract
Ⅰ. INTRODUCTION
Ⅱ. WINDING FACTORS TABLES
Ⅲ. COMPARISON OF DIFFERENT NUMBER OF LAYERS
Ⅳ. COMPARISONS OF DIFFERENT SLOT/POLE COMBINATIONS AND LOSS INDEX
Ⅴ. CONCLUSIONS
REFERENCES

참고문헌 (0)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2013-560-000301435