짧은 시간에 장거리를 전파하는 유도 초음파의 특성을 이용하면 빠르게 넓은 영역의 검사가 가능하다. 그러나 레일의 경우와 같이 단면이 단순하지 않고 임의의 형상을 갖는 구조물의 경우 초음파 전달시 발생하는 분산 특성이나 다수의 모드의 발생으로 초음파 신호의 분석에 어려움을 겪는다. 따라서 실용적인 유도 초음파 검사 시스템을 개발하기 위해서는 먼저 레일내를 전파하여 전달되는 초음파의 거동특성을 이해하여야 한다. 특히 레일내를 전파하는 초음파의 분산특성은 필수적으로 확인되어야 할 특성이다. 본논문에서는 SAFE법을 활용하여 KS60 레일내를 전파하는 초음파의 분산곡선을 구하는 방법을 소개하고 유도초음파를 활용한 레일 검사의 가능성에 대하여 살펴보았다.
Guided ultrasonic waves propagating over long distances within a short period provide a fast long-range inspection method. However, structures with arbitrary cross-sections, such as rails, have complicated dispersion characteristics that make analysis of the ultrasonic signal difficult. Therefore, an understanding of the characteristics of the propagating waves in rails is important for the creation of a reliable and practical inspection system using guided waves. In particular, it is necessary to investigate the dispersion characteristics of the guided waves. This paper introduces a method for the calculation of the dispersion curves of KS60 rails by adopting a SAFE method, and discusses the possibility of using guided waves as a technique for rail inspection.