??짧은 시간에 장거리를 전파하는 유도 초음파의 특성을 이용하면 빠르게 넓은 영역의 검사가 가능하다. 그러나 레일의 경우와 같이 단면이 단순하지 않고 임의의 형상을 갖는 구조물의 경우 초음파 전달시 발생하는 분산 특성이나 다수의 모드의 발생으로 초음파 신호의 분석에 어려움을 겪는다. 따라서 실용적인 유도 초음파 검사 시스템을 개발하기 위해서는 먼저 레일내를 전파하여 전달되는 초음파의 거동특성을 이해하여야 한다. 특히 레일내를 전파하는 초음파의 분산특성은 필수적으로 확인되어야 할 특성이라고 하겠다. 본 논문에서는 SAFE 법을 활용하여 KS60 레일내를 전파하는 초음파의 분산곡선을 구하는 방법을 소개하고 유도초음파를 활용한 레일 검사의 가능성에 대하여 살펴보았다.
Guided ultrasonic techniques propagating long distance within a short period of time provide a fast long range inspection method. But structures with an arbitrary cross-section such as rails have complicated dispersion characteristics which make it difficult to analyze the ultrasonic signal. Therefore understanding of the characteristics of the propagating waves in rails is important to make a reliable and practical inspection system using guided waves. Especially it is necessary to investigate the dispersion characteristics of the guided waves. This paper introduces the method to calculate the dispersion curves of KS60 rail by adopting a SAFE method and discuss the possibility of the guided waves as a rail inspection technique.