접이식 복합재 날개를 개발하여 중거리 GPS 유도 키트에 적용하였다. 날개는 항공기 장착을 위한 피벗과 양항비 증대를 위해 고세장비를 가지고 있다. 구조설계 요구조건을 만족하기 위하여 날개는 가벼워야할 뿐만 아니라 충분한 강도와 강성을 가지고 있어야 한다. 날개는 탄소섬유/에폭시 복합재로 설계되었으며, 제작비용을 줄이기 위해 일체형 구조로 설계/제작되었다. 구조성능을 검증하기 위해 하중해석 및 비행하중개관시험, 정적구조해석 및 시험, 지상진동시험 및 플러터해석을 수행하였으며, 이를 통하여 날개는 구조설계 요구조건을 만족하는 충분한 구조 강도와 강성을 가지고 있음을 확인하였다.
The pivoting composite wing is developed for the mid-range GPS guided kit. The wing has a pivoting structure for the installation to an aircraft and high aspect ratio to increase lift drag ratio. The wing needs to be light and have sufficient strength and stiffness to satisfy structural design requirements. The wing is designed with carbon fiber composite and the structural parts are integrated to reduce cost to manufacture. In order to verify the structural performances, the design load analysis and flight load survey, the static analysis and test, the ground vibration test and flutter analysis are performed. It is shown that the wing has sufficient structural strength and stiffness to satisfy the structural design requirements.