메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
김욱중 (한국기계연구원) 송찬호 (한국기계연구원) 박영찬 (액트) 조천휘 (액트) 이창섭 (액트) 이승구 (액트)
저널정보
대한설비공학회 대한설비공학회 학술발표대회논문집 대한설비공학회 2014년도 하계학술발표대회
발행연도
2014.6
수록면
796 - 799 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
To improve the performance of an air source heat pump for a cold area in Korea, various experiments were carried out. The experimental heat pump system was consisted of cascade cycle with high temperature loop for R410a and low temperature circuit for R134a. And intermediate heat exchanger, pressure maintaining device of orifice type, liquid-vapor injection and dual evaporator were added. The effects on the heat pump performance of the added devices were investigated. As a result, the use of intermediate heat exchanger showed high heating capacity and COP of heat pump in normal outdoor temperature, while resulting in low COP of heat pump in the low air temperature, compared with performance of the basic cycle. In case of using a condensation pressure maintaining device, high performance was shown in every outdoor temperature condition. When the air was supplied to the evaporator after dual-type evaporator, the air temperature increased and this temperature difference could delay the frosting on fin-tube type heat exchanger.

목차

ABSTRACT
1. 서론
2. 실험장치 및 방법
3. 실험결과 및 고찰
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0