메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
Jin-Woong Kim (Seoul National University) Jung-Ik Ha (Seoul National University)
저널정보
전력전자학회 ICPE(ISPE)논문집 ICPE 2015-ECCE Asia
발행연도
2015.6
수록면
2,123 - 2,128 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
The accurate value of the electric machine parameters is required to design an efficient current controller and torque controller in the permanent magnet synchronous machine (PMSM) drive system. The values of these parameters are not constant but vary with the operation condition. The stator winding resistance and rotor flux linkage are affected by the temperature. Inductances are changed according to the magnetic saturation. So each parameter need to be estimated in real time and updated to each controller. This paper enhances the accuracy of on-line parameter estimation in the low speed operation region using the proposed current shaping method. In the low speed operation region, the nonlinearity of voltage source inverter (VSI) causes estimation error. The proposed method adjusts the current reference to change rapidly at zero current region because the nonlinearity is severe at the region. By the dead time compensation and the proposed current shaping, the error caused area is reduced and estimation accuracy can be increased. Experimental results prove the feasibility and effectiveness of the proposed method.

목차

Abstract
I. INTRODUCTION
II. THE PROPOSED METHOD
III. SIMULATION RESULTS
IV. EXPERIMENTAL RESULTS
V. CONCLUSIONS
REFERENCES

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0