지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 대한전기학회 Journal of Electrical Engineering & Technology Journal of Electrical Engineering & Technology Vol.11 No.1
- 발행연도
- 2016.1
- 수록면
- 135 - 142 (8page)
이용수
초록· 키워드
오류제보하기
Generally, closed slots are adopted to reduce the water friction loss in both the stator and the rotor of water filling submersible motor due to the special environment of operation. One of the obvious differences between the traditional induction motors and water filling submersible motors is that the submersible motors only need relatively smaller starting torque. This paper aims to analyze the slot leakage reactance of water filling submersible motor during starting transient operation. An improved analytical method which considered the magnetic saturation of the slot bridge and the skin effect of rotor bars is proposed. The slot permeance factor which has a direct impact on the slot leakage reactance is calculated. Then finite element models with different stator slot types are constructed and search coils are introduced to measure the slot flux linkage. Moreover, the starting performances of the models with two typical stator slots are compared and the flux leakage characteristics are obtained. Finally, the results obtained by finite element method are very close to the results obtained by analytical method.
목차
Abstract
1. Introduction
2. Analytical Analysis of Slot Leakage Reactance During Starting Transient Operation
3. Finite Element Analysis of Slot Leakage Reactance During Starting Transient
4. Conclusion
References
참고문헌 (9)
참고문헌 신청
P.D. Agarwal, and P.L. Alger. “Saturation factors for leakage reactance of induction motors,” Transactions of the Power Apparatus and Systems. Vol. 79, No.3, pp.1037-1042, Oct. 1960.
S.A.Swann, and J.W. Salmon. “Effective resistance and reactance of a solid cylindrical conductor placed in a semi-closed slot,” Proceedings of the IEE-part C:Monographs. Vol. 109, No.16, pp. 611-615, July. 1962.
T.S. Birch, and O.I. Butler, “Permeance of closedslot bridges and its effect on induction-motor-current computation”, Proceeding of the Institution of Electrical Engineers, Vol. 118, No. 1, pp. 169-172, Jan. 1971.
Juha Pyrhonen, Tapani Jokinen, and Valeria Hrabovcova. Design of rotating electrical mechines. John Wiley& Sons, Ltd, 2008, pp. 234-244.
H. Grop, J. Soulard, and H. Persson, “Stator slot leakage in AC-machines equipped with fractional conductor windings,” International Conference on Electrical Machines and Systems, pp.1-6, 2009.
S.A.Swann, and J.W. Salmon. “Effective resistance and reactance of a solid cylindrical conductor placed in a semi-closed slot,” Proceedings of the IEE-part C:Monographs. Vol. 109, No.16, pp. 611-615, July. 1962.
T.S. Birch, and O.I. Butler, “Permeance of closedslot bridges and its effect on induction-motor-current computation”, Proceeding of the Institution of Electrical Engineers, Vol. 118, No. 1, pp. 169-172, Jan. 1971.
Juha Pyrhonen, Tapani Jokinen, and Valeria Hrabovcova. Design of rotating electrical mechines. John Wiley& Sons, Ltd, 2008, pp. 234-244.
H. Grop, J. Soulard, and H. Persson, “Stator slot leakage in AC-machines equipped with fractional conductor windings,” International Conference on Electrical Machines and Systems, pp.1-6, 2009.
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Detection of Eccentricity Fault Using Slot Leakage Flux Monitoring
ICPE(ISPE)논문집
2015 .06
-
BLDC 모터 고정자 슬롯 형상설계에 관한 연구
조명·전기설비학회논문지
2015 .05
-
안테나 내부 slot 개수 및 slot 간의 거리에 따른 마이크로파 열 절제 술 조건 최적화
대한기계학회 춘추학술대회
2024 .11
-
유도전동기의 슬롯 조합에 따른 진동/소음 특성 분석
전기학회논문지
2023 .02
-
극 슬롯 조합에 따른 영구자석 표면 부착형 동기전동기의 특성 분석 연구
전기학회논문지
2022 .02
-
극수 슬롯수가 1:6구조에서의 극수 변화에 따른 성능특성해석
조명·전기설비학회논문지
2025 .04
-
Analysis of Starting Torque and Speed Characteristics for Squirrel Cage Induction Motor According to Material Properties of Rotor Slot
Transactions on Electrical and Electronic Materials
2015 .01
-
사각 도파관 기반 마이크로웨이브 플라즈마 슬랏 안테나 구조 최적화 설계
전기학회논문지
2024 .12
-
소형 Slot less PMSM의 coil 배치에 따른 최적 설계 및 열 내구성 분석
전기학회논문지
2017 .01
-
Research on Oscillation Character of Six-Phase Fractional-Slot Concentrated-Winding Permanent Motor with Different Slot-Pole Match
Journal of Electrical Engineering & Technology
2016 .11
-
Improved Method for Calculating Armature-Reaction Field of Surface-Mounted Permanent Magnet Machines Accounting for Opening Slots
Journal of Electrical Engineering & Technology
2015 .07
-
SLOT 운영 최적화 원천기술 사례 조사
대한교통학회 학술대회지
2021 .11
-
슬롯수 조합에 따른 유도전동기의 진동 특성
조명·전기설비학회논문지
2022 .03
-
Comparative Analysis of Magnetic Slot Wedges Design for Increasing Performance of Railway Traction Motor
Journal of Electrical Engineering & Technology
2017 .11
-
수중 통신을 위한 가변 슬롯 길이의 Slotted ALOHA
한국통신학회 학술대회논문집
2016 .01
-
서지성능 향상을 위한 원심압축기의 Bleed Slot Casing의 설계변수에 대한 해석 및 시험 평가
한국유체기계학회 논문집
2015 .04
-
Measurement method for flow distribution through slot die
한국생산제조학회 학술발표대회 논문집
2020 .10
-
AIP 모델을 응용한 균형적 공항 슬롯 배정 모델에 관한 연구 -인천국제공항 사례 연구-
한국항공운항학회지
2018 .01
-
수중 통신 시스템을 위한 가변 길이를 갖는 Slotted ALOHA
한국통신학회논문지
2016 .01
-
Compact Dual-Band Half-Ring-Shaped Bent Slot Antenna for WLAN and WiMAX Applications
Journal of information and communication convergence engineering
2017 .12
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2016-560-002322718