지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
초록· 키워드
오류제보하기
This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2015. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows.
(1) The research works on the thermal and fluid engineering were carried out in the areas of flow, heat and mass transfer, cooling and heating, and air-conditioning, the renewable energy system and the flow inside building rooms. Research issues dealing with air-conditioning machines and fire and exhausting smoke were reduced. CFD seems to be spreading to more research areas.
(2) Research works on heat transfer area were carried out in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the economic analysis of GHG emission, micro channel heat exchanger, effect of rib angle on thermal performance, the airside performance of fin-and-tube heat exchangers, theoretical analysis of a rotary heat exchanger, heat exchanger in a cryogenic environment, the performance of a cross-flow-type, indirect evaporative cooler made of paper/plastic film. In the area of pool boiling and condensing, the bubble jet loop heat pipe was studied. In the area of industrial heat exchangers, researches were performed on fin-tube heat exchanger, KSTAR PFC and vacuum vessel at baking phase, the performance of small-sized dehumidification rotor, design of gas-injection port of an asymmetric scroll compressor, effect of slot discharge-angle change on exhaust efficiency of range hood system with air curtain.
(3) In the field of refrigeration, various studies were carried in the categories of refrigeration cycle, alternative refrigeration/energy system, system control. In the refrigeration cycle category, a cold-climate heat pump system, CO<SUB>2</SUB> cascade systems, ejector cycles and a PCM-based continuous heating system were investigated. In the alternative refrigeration/energy system category, a polymer adsorption heat pump, an alcohol absorption heat pump and a desiccant-based hybrid refrigeration system were investigated. In the system control category, turbo-refrigerator capacity controls and an absorption chiller fault diagnostics were investigated.
(4) In building mechanical system research fields, eighteen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings.
(5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the user and location awareness technology applied dimming lighting control system, the lighting performance evaluation for light-shelves, the improvement evaluation of air quality through analysis of ventilation efficiency and the evaluation of airtightness of sliding and LS window systems. The subjects of building energy were worked on the energy saving estimation of existing buildings, the developing model to predict heating energy usage in domestic city area and the performance evaluation of cooling applied with economizer control. The studies were also performed related to the experimental measurement of weight variation and thermal conductivity in polyurethane foam, the development of flame spread prevention system for sandwich panels, the utilization of heat from waste-incineration facility in large-scale horticultural facilities.
(1) The research works on the thermal and fluid engineering were carried out in the areas of flow, heat and mass transfer, cooling and heating, and air-conditioning, the renewable energy system and the flow inside building rooms. Research issues dealing with air-conditioning machines and fire and exhausting smoke were reduced. CFD seems to be spreading to more research areas.
(2) Research works on heat transfer area were carried out in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the economic analysis of GHG emission, micro channel heat exchanger, effect of rib angle on thermal performance, the airside performance of fin-and-tube heat exchangers, theoretical analysis of a rotary heat exchanger, heat exchanger in a cryogenic environment, the performance of a cross-flow-type, indirect evaporative cooler made of paper/plastic film. In the area of pool boiling and condensing, the bubble jet loop heat pipe was studied. In the area of industrial heat exchangers, researches were performed on fin-tube heat exchanger, KSTAR PFC and vacuum vessel at baking phase, the performance of small-sized dehumidification rotor, design of gas-injection port of an asymmetric scroll compressor, effect of slot discharge-angle change on exhaust efficiency of range hood system with air curtain.
(3) In the field of refrigeration, various studies were carried in the categories of refrigeration cycle, alternative refrigeration/energy system, system control. In the refrigeration cycle category, a cold-climate heat pump system, CO<SUB>2</SUB> cascade systems, ejector cycles and a PCM-based continuous heating system were investigated. In the alternative refrigeration/energy system category, a polymer adsorption heat pump, an alcohol absorption heat pump and a desiccant-based hybrid refrigeration system were investigated. In the system control category, turbo-refrigerator capacity controls and an absorption chiller fault diagnostics were investigated.
(4) In building mechanical system research fields, eighteen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings.
(5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the user and location awareness technology applied dimming lighting control system, the lighting performance evaluation for light-shelves, the improvement evaluation of air quality through analysis of ventilation efficiency and the evaluation of airtightness of sliding and LS window systems. The subjects of building energy were worked on the energy saving estimation of existing buildings, the developing model to predict heating energy usage in domestic city area and the performance evaluation of cooling applied with economizer control. The studies were also performed related to the experimental measurement of weight variation and thermal conductivity in polyurethane foam, the development of flame spread prevention system for sandwich panels, the utilization of heat from waste-incineration facility in large-scale horticultural facilities.
#Thermal storage(축열)
#Microchannel(마이크로 채널)
#Rotary heat mass exchanger(회전형 열물질교환기)
#Desiccant dehumidification(흡착 제습)
#Adsorption heat exchanger(흡착 열교환기)
#District heating(지역난방)
#Geothermal system(지열시스템)
#Centrifugal chiller(터보냉동기)
#Stack effect(연돌효과)
#Air-conditioning(공조)
#Building energy(건물 에너지)
#Low energy house(저에너지주택)
#Insulation(단열)
#Lighting(조명)
목차
Abstract
1. 서론
2. 열유체
3. 열전달 및 열교환기
4. 냉동
5. 건축기계설비
6. 건축환경
7. 결론
References
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
설비공학 분야의 최근 연구 동향 : 2016년 학회지 논문에 대한 종합적 고찰
설비공학논문집
2017 .06
-
설비공학회 분야의 최근 연구 동향 : 2017년 학회지 논문에 대한 종합적 고찰
설비공학논문집
2018 .06
-
설비공학 분야의 최근 연구 동향 : 2014년 학회지 논문에 대한 종합적 고찰
설비공학논문집
2015 .07
-
설비공학 분야별 최근 연구 동향: 2022년 설비공학논문집 발표논문에 대한 종합적 고찰
설비공학논문집
2023 .06
-
설비공학 분야별 최근 연구 동향 : 2020년 설비공학논문집 발표논문에 대한 종합적 고찰
설비공학논문집
2021 .06
-
설비공학 분야별 최근 연구 동향 : 2018년 설비공학논문집 발표논문에 대한 종합적 고찰
설비공학논문집
2019 .06
-
설비공학 분야별 최근 연구 동향: 2021년 설비공학논문집 발표논문에 대한 종합적 고찰
설비공학논문집
2022 .06
-
지역난방 사용자시설 열교환기의 최적온도차 제어를 통한 에너지절감
한국에너지기후변화학회 학술대회
2016 .11
-
소규모 건물에서 환기공급방식에 따른 에너지 절감효과 분석
설비공학논문집
2021 .02
-
설비공학 분야별 최근 연구 동향 : 2019년 설비공학논문집 발표논문에 대한 종합적 고찰
설비공학논문집
2020 .06
-
제로에너지건물에서 지열에너지적용 사례 분석
한국신·재생에너지학회 학술대회 초록집
2018 .11
-
박막 흡착열교환기를 채용한 흡착식 냉동기의 성능해석
설비공학논문집
2018 .12
-
에너지 저감을 위한 사용자 및 위치인식 기술 적용 디밍 조명제어 시스템 연구
설비공학논문집
2015 .01
-
거주자의 건물에너지 절약을 위한 건축물 에너지 소비량 정보 구축 및 활용 전략
한국건축친환경설비학회 논문집
2015 .04
-
제로에너지건물에 적합한 에너지절감 공조시스템
대한설비공학회 학술발표대회논문집
2017 .11
-
제로에너지건축물 계획을 위한 국내외 에너지성능관련 제도의 평가도구 비교분석 및 개선방안 연구
대한건축학회 논문집 - 계획계
2015 .04
-
소규모 건축물의 냉난방 및 급탕부하 제어를 위한 통합설비 구성 방안
대한설비공학회 학술발표대회논문집
2021 .06
-
건축물 통합지원시스템의 개발 및 필요 서비스 조사에 관한 연구
대한설비공학회 학술발표대회논문집
2015 .06
-
TRNSYS 프로그램을 이용한 대형쇼핑매장 에너지성능해석 및 지열시스템을 도입하는 경우 에너지절약 특성분석
조명·전기설비학회논문지
2015 .01
-
공동주택 지역난방시스템 내 제한된 센싱환경에서의 시스템 열손실 모니터링 모델 구축 방법에 관한 연구
대한설비공학회 학술발표대회논문집
2021 .06
이 논문의 저자 정보
이 논문과 함께 이용한 논문
CFD를 이용한 주택시설 주방환기 성능 개선 방안 연구
강윤도
,
이종찬
,
김병선
KIEAE Journal
2018
.02
전산유체역학(CFD)분석을 통한 에어글라이드창호 환기성능평가
양영권
,
박보랑
,
최은지
외 3명
KIEAE Journal
2018
.02
대공간공조의 에너지 절약 시스템 복사냉난방의 적용 사례
이현종
,
김진철
설비저널
2018
.01
에너지 절감을 위한 클린룸 공조 기술
노광철
설비저널
2017
.05
CFD를 활용한 바닥공조시스템 디퓨저의 성층화 모델 예측
손정은
,
유병호
,
방승기
외 1명
설비공학논문집
2017
.03
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2017-553-000676861