지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2017.6
- 수록면
- 242 - 249 (8page)
이용수
초록· 키워드
오류제보하기
A design system for doubler reinforcement of the ship plate members subjected to in-plane shear and biaxial compressive loads was developed. This design system of doubler reinforcement on ship plate members established by design supporting system and this system was based on the buckling evaluation process of ship plate members for these in-plane loads. Each design parameters were suggested by equations as the form of influence coefficients for the doubler reinforcement subjected to the various in-plane loads including shear load. Strength of doubler plate member reinforced on the plate member could be suggested by the equivalent flat plate thickness after the consideration of corelation equations in the design system of doubler reinforcement. Level of strength recovery of ship plate members for these in-plane loads according to the local reinforcement by doubler could be suggested by use of this design system in the initial repair design stage of shipyards.
목차
1. 서론
2. 이중판 보강 선박판부재 개요
3. 설계 정식화
4. 면내 전단력 및 양축압축력을 고려한 이중판 보강 판부재 설계시스템
5. 선박 판부재의 설계 예
6. 결론
References
참고문헌 (9)
참고문헌 신청
Ham, J.H., 1999. Strength evaluation of doubler plate of ship structure subjected to the longitudinal in-plane compression. Proceedings of the Annual Autumn Meeting, the Society of Naval Architects of Korea, Daejeon, Republic of Korea, 11-12 November 1999.
Ham, J.H., 2001. Strength evaluation of a doubler plate of ship structure subjected to the biaxila in-plane compression. Journal of the Society of Naval Architects of Korea, 38(1), pp.72-85.
Ham, J.H. & Kim, U.N., 1997. The development of advanced buckling strength estimation system. Journal of the Society of Naval Architects of Korea, 34(3), pp.53-60.
Ham, J.H., 2014. Development of slender doubler plate hybrid design system for ship structure subjected to longitudinal in-plane compression. Journal of Ocean Engineering and Technology, 28(1), pp.20-27.
Ham, J.H., 2016. Development of ship plate member design system reinforced by doubler plate subjected to biaxial in-plane compressive load. Journal of Ocean Engineering and Technology, 30(4), pp.294-302.
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
양축 면내 압축하중 하의 이중판보강 선박판부재의 설계시스템 구축
한국해양공학회지
2016 .08
-
각종 면내 및 면외 하중을 받는 선박판부재의 이중판 설계시스템 구축
대한조선학회 논문집
2018 .12
-
면내조합하중과 횡압 하의 선박 이중판 설계시스템 구축
한국해양공학회지
2019 .04
-
Analysis of laminated composite plates based on different shear deformation plate theories
Structural Engineering and Mechanics, An Int＇l Journal
2020 .01
-
Buckling Analysis of Rectangular Plates using an Enhanced 9-node Element
ARCHITECTURAL RESEARCH
2016 .09
-
Topology optimization of steel plate shear walls in the moment frames
Steel and Composite Structures, An International Journal
2018 .01
-
The buckling of piezoelectric plates on pasternak elastic foundation using higher-order shear deformation plate theories
Smart structures and systems
2018 .01
-
A new four-unknown equivalent single layer refined plate model for buckling analysis of functionally graded rectangular plates
Structural Engineering and Mechanics, An Int＇l Journal
2024 .06
-
철근 콘크리트 전단벽에서 면외 하중이 면내 전단성능에 미치는 영향
한국지진공학회 논문집
2024 .03
-
An original single variable shear deformation theory for buckling analysis of thick isotropic plates
Structural engineering and mechanics : An international journal
2017 .01
-
A new 3-unknowns non-polynomial plate theory for buckling and vibration of functionally graded sandwich plate
Structural Engineering and Mechanics, An Int＇l Journal
2016 .01
-
The buckling of piezoelectric plates on pasternak elastic foundation using higher-order shear deformation plate theories
Smart Structures and Systems, An International Journal
2018 .01
-
The critical buckling load of reinforced nanocomposite porous plates
Structural engineering and mechanics : An international journal
2018 .01
-
A novel refined shear deformation theory for the buckling analysis of thick isotropic plates
Structural Engineering and Mechanics, An Int＇l Journal
2019 .01
-
Base Plate로 보강된 기둥-기초 접합부의 뚫림전단강도 연구
한국구조물진단유지관리공학회 논문집
2015 .01
-
Buckling characteristics and static studies of multilayered magneto-electro-elastic plate
Structural Engineering and Mechanics, An Int＇l Journal
2017 .01
-
On thermal stability of plates with functionally graded coefficient of thermal expansion
Structural Engineering and Mechanics, An Int＇l Journal
2016 .01
-
Buckling characteristics and static studies of multilayered magneto-electro-elastic plate
Structural engineering and mechanics : An international journal
2017 .01
-
The critical buckling load of reinforced nanocomposite porous plates
Structural Engineering and Mechanics, An Int＇l Journal
2018 .01
-
Thermal stability analysis of solar functionally graded plates on elastic foundation using an efficient hyperbolic shear deformation theory
Geomechanics & engineering
2016 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2018-538-000900036