지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2019.4
- 수록면
- 146 - 152 (7page)
이용수
초록· 키워드
오류제보하기
A design system was developed for the doubler plate of a ship structure simultaneously subjected to in-plane loads and lateral pressure based on general dimensions and those of a representative ship structure. An equivalent design equation that considers various structural design parameters was derived by introducing the equivalent plate thickness theory, and the design of the doubler plate reinforcement of the ship structure was developed. A hybrid structural design system was established for a doubler plate simultaneously subjected to in-plane loads and lateral pressure consisting of two modules: an optimized design module and a double plate strength & design review module. The practical application of this design system was illustrated to show its usability. It was found that the design safety of the doubler plate was ensured, and this system could be used as an initial design guide to review the double plate reinforcement for a dent or corrosion of the ship plate members. Using the developed design system would make it possible to obtain a more reasonable doubler plate structure that considers the rational reinforcement of plate members of ship structures. In addition, a more reliable structural analysis using a strength evaluation process can be performed to verify the efficiency of the optimum structural design for the doubler plate structure.
목차
ABSTRACT
1. 서론
2. 적용 판부재 및 이중판 보강 개요
3. 이중판 보강을 고려한 판부재 설계식의 도입
4. 하이브리드 구조설계시스템
5. 이중판 판부재 설계
6. 결론
References
참고문헌 (9)
참고문헌 신청
Ham, J.H., 1997. A Study for Rationalization of Lifting Lug Design of Ship Block. Journal of Ocean Engineering and Technology, 11(3), 249-261.
Ham, J.H., 1999. Strength Evaluation of Doubler Plate of Ship Structure subjected to the Longitudinal In-plane Compression. Proceedings of the Annual Autumn Meeting, the Society of Naval Architects of Korea, 471-474.
Ham, J.H., 2003. Strength Evaluation of a Doubler Plate of Ship Structure Subjected to the In-plane Combined Load and Lateral Pressure Load. Journal of the Society of Naval Architects of Korea, 40(6), 37-48.
Ham, J.H., 2011. Prametric Design Considerations for Lifting Lug Structure on Ship Block. Journal of Ocean Engineering and Technology, 25(2), 101-107.
Ham, J.H., 2017. Development of Doubler Design System for Ship Plate Members Subjected to In-plane Shear and Biaxial Compressive Loads. Journal of the Society of Naval Architects of Korea, 54(3), 242-249.
Ham, J.H., 1999. Strength Evaluation of Doubler Plate of Ship Structure subjected to the Longitudinal In-plane Compression. Proceedings of the Annual Autumn Meeting, the Society of Naval Architects of Korea, 471-474.
Ham, J.H., 2003. Strength Evaluation of a Doubler Plate of Ship Structure Subjected to the In-plane Combined Load and Lateral Pressure Load. Journal of the Society of Naval Architects of Korea, 40(6), 37-48.
Ham, J.H., 2011. Prametric Design Considerations for Lifting Lug Structure on Ship Block. Journal of Ocean Engineering and Technology, 25(2), 101-107.
Ham, J.H., 2017. Development of Doubler Design System for Ship Plate Members Subjected to In-plane Shear and Biaxial Compressive Loads. Journal of the Society of Naval Architects of Korea, 54(3), 242-249.
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
각종 면내 및 면외 하중을 받는 선박판부재의 이중판 설계시스템 구축
대한조선학회 논문집
2018 .12
-
양축 면내 압축하중 하의 이중판보강 선박판부재의 설계시스템 구축
한국해양공학회지
2016 .08
-
면내 전단하중과 양축압축하중을 받는 선박 판부재의 이중판 설계시스템 개발
대한조선학회 논문집
2017 .06
-
Topology optimization of steel plate shear walls in the moment frames
Steel and Composite Structures, An International Journal
2018 .01
-
Analysis of laminated composite plates based on different shear deformation plate theories
Structural Engineering and Mechanics, An Int＇l Journal
2020 .01
-
Vibration of a Circular plate on Pasternak foundation with variable modulus due to moving mass
Structural Engineering and Mechanics, An Int＇l Journal
2022 .09
-
Wind load characteristics of large billboard structures with two-plate and three-plate configurations
Wind & structures
2016 .01
-
Dynamic analysis of a transversely isotropic non-classical thin plate
Wind & structures
2017 .01
-
3D프린팅을 이용한 의료용 Bone Plate 구조해석 및 최적설계
대한기계학회 춘추학술대회
2024 .11
-
Deflection of axially functionally graded rectangular plates by Green’s function method
Steel and Composite Structures, An International Journal
2019 .01
-
대형 판형 열교환기 전열판 유체분배부 최적화에 관한 연구
한국기계기술학회지
2020 .01
-
플레이트의 소성변형 과정이 재건술에서 플레이트 안정성에 미치는 영향
한국CDE학회 논문집
2016 .09
-
A new 3-unknowns non-polynomial plate theory for buckling and vibration of functionally graded sandwich plate
Structural Engineering and Mechanics, An Int＇l Journal
2016 .01
-
A method for predicting approximate lateral deflections in thin glass plates
Structural engineering and mechanics : An international journal
2015 .01
-
A novel refined plate theory for stability analysis of hybrid and symmetric S-FGM plates
Structural Engineering and Mechanics, An Int＇l Journal
2018 .01
-
Forced vibrations of an elastic rectangular plate supported by a unilateral two-parameter foundation via the Chebyshev polynomials expansion
Structural Engineering and Mechanics, An Int＇l Journal
2024 .06
-
On thermal stability of plates with functionally graded coefficient of thermal expansion
Structural Engineering and Mechanics, An Int＇l Journal
2016 .01
-
일체형 Plate Lower 개발을 위한 Progressive 공정설계에 관한 연구
한국소성가공학회 학술대회 논문집
2018 .10
-
Aluminum and E-glass epoxy plates behavior subjected to shock loading
Advances in materials research : AMR
2017 .01
-
얇은 사각형 판 저장 구조물에 대한 동특성해석
한국소음진동공학회 학술대회논문집
2015 .04
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2019-454-000689548