메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
이학민 (한국과학기술원) 권오준 (한국과학기술원)
저널정보
한국전산유체공학회 한국전산유체공학회지 한국전산유체공학회지 제22권 제3호
발행연도
2017.9
수록면
1 - 8 (8page)
DOI
10.6112/kscfe.2017.22.3.001

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
In the present study, a numerical study about flow control of a wind turbine airfoil was performed using computational fluid dynamics (CFD). Two dimensional unsteady Reynolds-Averaged Navier-Stokes (RANS) solver was used to solve the flow around a wind turbine airfoil. Synthetic jets were applied to the DU 35 airfoil used in the inboard section of the NREL 5MW wind turbine. In order to simulate the synthetic jets, suction/blowing boundary condition was applied. The flow characteristics of synthetic jets were investigated according to the injection speed and injection angle. The injection velocity is 1, 2, and 3 times the freestream and the injection angle is 45 degrees. As the injection speed increases, more energy is transferred into the boundary layer. Therefore, the performance of the DU 35 airfoil is most improved when the injection speed is 3 times the freestream. In the case of the injection angle, the flow analysis was performed at 0 degrees, 45 degrees, and the direction perpendicular to the surface. The injection speed at this time is 3 times. The size and shape of the vortices generated by the synthetic jets depend on the injection angle. When the injection angle is 45 degrees, the performance enhancement of the DU 35 airfoil is the greatest.

목차

1. 서론
2. 지배방정식 및 합성제트 모델링
3. 결과 및 고찰
4. 결론
References

참고문헌 (14)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2018-559-001351747