지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2016.1
- 수록면
- 112 - 119 (8page)
이용수
초록· 키워드
오류제보하기
A powder injection molding process is developed and optimized for piezoelectric PAN-PZT ceramics.
Torque rheometer experiments are conducted to determine the optimal solids loading, and the rheological property of the feedstock is evaluated using a capillary rheometer. Appropriate debinding conditions are chosen using a thermal gravity analyzer, and the debound specimens are sintered using sintering conditions determined in a preliminary investigation.
Piezoelectric performance measures, including the piezoelectric charge constant and dielectric constant, are measured to verify the developed process. The average values of the measured piezoelectric charge constant and dielectric constant are 455 pC/N and 1904, respectively. Powder injection molded piezoelectric ceramics produced by the optimized process show adequate piezoelectric performance compared to press-sintered piezoelectric ceramics.
목차
등록된 정보가 없습니다.
참고문헌 (18)
참고문헌 신청
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
매개변수 평가법을 이용한 압전재료의 재료물성 최적화 연구 Part I. 다결정 PZT 세라믹스
전기전자재료학회논문지
2022 .09
-
집속 초음파 장치용 PZT 세라믹스 제조에 관한 연구
동력시스템공학회지
2020 .12
-
Experimental investigation on micro ceramic injection molding process for fabrication of high-aspect-ratio piezo structure
한국소성가공학회 학술대회 논문집
2019 .05
-
Textured Ceramics for Multilayered Actuator Applications: Challenges, Trends, and Perspectives
전기전자재료학회논문지
2023 .05
-
Microstructure and Piezoelectric Properties of Pb(Ni1/3 Nb2/3 ) O3 ?Pb(Zr,Ti)O3 System Ceramics Doped with Sb2O5 for Ultrasonic Nondestructive Testing Transducer
Transactions on Electrical and Electronic Materials
2021 .12
-
Master Curve Approach for Debinding and Sintering Behavior Analysis of Piezoelectric Powder Injection Molding Process
한국정밀공학회 학술발표대회 논문집
2019 .05
-
Investigation of Electrical Properties & Mechanical Quality Factor of Piezoelectric Material (PZT-4A)
Journal of Electrical Engineering & Technology
2017 .03
-
저온 소결 압전 세라믹의 탈지 및 소결 거동에 관한 연구
한국기계가공학회 춘추계학술대회 논문집
2019 .04
-
Preparation of Highly (002) Oriented Ti Films on a Floating Si (100) Substrate by RF Magnetron Sputtering
Electronic Materials Letters
2020 .01
-
압전 세라믹의 제작 방법에 따른 압전성능 변화 연구
항공우주시스템공학회 학술행사 논문집
2015 .05
-
합성방법과 소결 온도가 PZNN-PZT 압전 세라믹스 소재특성에미치는 영향
한국분말야금학회지
2018 .01
-
압전세라믹 벌크의 분극 및 적층공정 최적화
한국소음진동공학회 학술대회논문집
2015 .04
-
Electrical Characteristics of High-Performance Ultrasonic Transducer for Non-Destructive Testing
Transactions on Electrical and Electronic Materials
2023 .04
-
Influence of polled direction on the stress distribution in piezoelectric materials
Structural engineering and mechanics : An international journal
2015 .01
-
The influence of the initial stresses on Lamb wave dispersion in pre-stressed PZT/Metal/PZT sandwich plates
Structural Engineering and Mechanics, An Int＇l Journal
2016 .01
-
링 형 PZT 세라믹스의 기계적 물성에 대한 소결 조건의 영향
동력시스템공학회지
2019 .04
-
Active vibration control: considering effect of electric field on coefficients of PZT patches
Smart structures and systems
2015 .01
-
Review of Sintering Technologies, Structural Characteristics, and Piezoelectric Properties of NKN-Based Lead-Free Ceramics
Transactions on Electrical and Electronic Materials
2019 .01
-
Improved temperature stability of Ba0.5Sr0.5TiO3/ZnAl2O4 ceramics by controlling microstructure with sintering behavior
Journal of Ceramic Processing Research
2023 .04
이 논문의 저자 정보
최근 본 자료
댓글(0)
0