메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
Jeha Kim (Cheongju University)
저널정보
한국진공학회(ASCT) Applied Science and Convergence Technology Applied Science and Convergence Technology Vol.28 No.6
발행연도
2019.11
수록면
229 - 233 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
We investigate the effect of hydrazine on the growth and physical characteristics of ZnS thin films deposited on both soda–lime glass (SLG) and copper indium gallium selenide (CIGS)/Mo/SLG substrates as a function of the relative molar ratio of hydrazine to ammonia reagent, r<SUB>c</SUB>, for various deposition times t<SUB>d</SUB>. As r<SUB>c</SUB> is varied from 0 to 0.56, all the ZnS films on SLG (thickness of d ~ 38 nm) with hydrazine exhibit an amorphous structure, [S/Zn] composition of ~ 0.65, and direct energy bandgap of Eg = 3.54 – 3.75 eV. To compare the difference in device quality corresponding to the two types of substrates, we fabricate CIGS solar cells using ZnS buffers grown under conditions of r<SUB>c</SUB> = 0.28, 0.42 for t<SUB>d</SUB> = 30 min, 15 min and without hydrazine with r<SUB>c</SUB> = 0.0 and t<SUB>d</SUB> = 90 min. The sample obtained with the ZnS buffer under conditions of r<SUB>c</SUB> = 0.28, t<SUB>d</SUB> = 30 min exhibits the best solar cell performance of η = 12.03 %. Our results prove that using hydrazine for ZnS buffer layer preparation via chemical bath deposition can significantly enhance the film quality for CIGS solar-cell fabrication.

목차

ABSTRACT
Ⅰ. Introduction
Ⅱ. Experimental method
Ⅲ. Results and discussion
Ⅳ. Conclusion
References

참고문헌 (18)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2020-420-000200644