메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
Sung Woong Choi (Gyeongsang National University) Jae Sung Kwon (Gyeongsang National University) Jeong Hyeon Yang (Gyeongsang National University) Hee Suk Ryoo (Korea Electrotechnology Research Institute) Hyeong Min Yoo (Korea Institute of Materials Science)
저널정보
한국마린엔지니어링학회 Journal of Advanced Marine Engineering and Technology (JAMET) 한국마린엔지니어링학회지 제43권 제10호
발행연도
2019.12
수록면
805 - 809 (5page)
DOI
10.5916/jkosme.2019.43.10.805

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Over the last decade, the demand for glass fiber and carbon fiber reinforced composites has been increasing in composite industries, such as aerospace, wind energy, automotive, and marine industries. This study focuses on composite-material based turbine blade manufacturing, especially for the glass fiber behavior in resin flow, which can be observed in the process of resin impregnation in fibers with different flow rate conditions. Tow deformation was observed for the two main tow behaviors-tow thickness and distance. The results confirmed that tow thickness decreased when positioned along the flow direction with increasing flow rate. Furthermore, the distance between the tows also decreased when positioned along the flow direction.

목차

Abstract
1. Introduction
2. Characteristics of Wind Turbine Blades Manufacturing
3. Experimental conditions
4. Experimental results
5. Conclusion
References

참고문헌 (15)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2020-559-000229512