메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
유제형 (서울과학기술대학교) 이창환 (서울과학기술대학교)
저널정보
Korean Society for Precision Engineering Journal of the Korean Society for Precision Engineering Journal of the Korean Society for Precision Engineering Vol.37 No.3
발행연도
2020.3
수록면
201 - 207 (7page)
DOI
10.7736/JKSPE.019.106

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The purpose of this study was to investigate the springback behavior of magnesium alloy (AZ31B) at high temperature with respect to the holding time in the die-set. The changes of microstructure in the springback during V-Bending were analyzed. The springback of the magnesium alloy sheet showed a tendency to decrease as the forming temperature and the retention time in the die increase. In the microstructure analysis, there was minimal change in the microstructure at room temperature, while at high temperature the microstructure changed markedly. The increasing material holding time in die has been shown to reduce springback from internal energy reduction because of recrystallization and grain growth at high temperature.

목차

1. 서론
2. 실험 방법
3. 온도 및 금형 내 소재의 유지 시간 증가에 따른 L굽힘 및 V굽힘 실험 결과
4. 고찰
5. 결론
REFERENCES

참고문헌 (10)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2020-555-000424702