메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
Wenjie Ge (Yangzhou University) Ashraf F. Ashour (University of Bradford) Weigang Lu (Yangzhou University) Dafu Cao (Yangzhou University)
저널정보
한국콘크리트학회 International Journal of Concrete Structures and Materials International Journal of Concrete Structures and Materials Vol.14 No.2
발행연도
2020.3
수록면
213 - 232 (20page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Experimental and theoretical investigations on the flexural performance of steel reinforced ECC-concrete composite beams subjected to freeze-thaw cycles are presented in this paper. Four groups of reinforced composite beams with different ECC height replacement ratios subject to 0, 50, 100 and 150 cycles of freeze-thaw were physically tested to failure. Experimental results show that the bending capacity decreases with the increase of freeze-thaw cycles regardless of ECC height replacement ratios. However, the ultimate moment, stiffness and durability of ECC specimens and ECC-concrete composite specimens are greater than those of traditional concrete specimens, owing to the excellent tensile performance of ECC materials. With the increase of ECC height, the crack width and average crack spacing gradually decrease. According to materials’ constitutive models, compatibility and equilibrium conditions, three failure modes with two boundary failure conditions are proposed. Simplified formulas for the moment capacity are also developed. The results predicted by the simplified formulas show good agreement with the experimental moment capacity and failure modes. A parametric analysis is conducted to study the influence of strength and height of ECC, amount of reinforcement, concrete strength and cycles of freeze-thaw on moment capacity and curvature ductility of ECC-concrete composite beams.

목차

Abstract
1. Introduction
2. Experimental Program
3. Test Results
4. Theoretical Analysis
5. Parametric study
6. Conclusions
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2020-532-000540100