지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 한국콘크리트학회 International Journal of Concrete Structures and Materials International Journal of Concrete Structures and Materials Vol.14 No.3
- 발행연도
- 2020.5
- 수록면
- 401 - 411 (11page)
이용수
초록· 키워드
오류제보하기
Plastic bottles are non-biodegradable material made up of Polyethylene Terephthalate (PET) and takes around 450 years to get decomposed. In Malaysia, near 13.2% of plastics contribute to municipal solid waste, where 2.5% is PET. To reduce the waste, interlocking bricks manufacture by waste plastic bottles are used to replace the conventional bricks that use cement and clay. The purpose of this research is to reuse plastic bottles comprised of Polyethylene Terephthalate and Polyurethane binder, by manufacturing interlocking brick that helps to reduce the waste on landfills and the pollution. The plastic bottles were shredded and grinded to a size of 0.75 mm and mixed with the Polyurethane (PU) and the Polymer. The mixed later casted and compacted in the interlocking brick machine mould. The tests performed on the interlocking bricks were compressive strength, impact, flexural strength and thermal conductivity for obtaining the mechanical and thermal properties. The tests values were then keyed into the Response Surface Methodology (RSM) to obtain the optimal PET and PU to verify reliability. Based on the results it is concluded that PET/PU of 60/40 ratio is suitable as non-load bearing masonry brick and recommended to be used as partition walls.
목차
Abstract
1. Introduction
2. Methodology
3. Results and Discussion
4. Conclusion
5. Recommendation
References
참고문헌 (30)
참고문헌 신청
Abu-Isa, I. A. / 1996 / High-impact-strength poly(ethylene terephthalate)(PET)from virgin and recycled resins / Journal of Applied Polymer Science 59:1957~1971
Aciu, C. / 2015 / Recycling of polystyrene waste in the composition of ecological mortars / Procedia Technology 19:498~505
AL-Fakih, A. / 2018 / Development of interlocking masonry bricks and its’ structural behaviour : A review paper / IOP Conference Series: Earth and Environmental Science :012127
Al-Fakih, A. / 2018 / Physical properties of the rubberized interlocking masonry brick / International Journal of Civil Engineering and Technology 9(6):656~664
Al-Fakih, A. / 2020 / Experimental study on axial compressive behavior of rubberized interlocking masonry walls / Journal of Building Engineering 1(29):101107
Aciu, C. / 2015 / Recycling of polystyrene waste in the composition of ecological mortars / Procedia Technology 19:498~505
AL-Fakih, A. / 2018 / Development of interlocking masonry bricks and its’ structural behaviour : A review paper / IOP Conference Series: Earth and Environmental Science :012127
Al-Fakih, A. / 2018 / Physical properties of the rubberized interlocking masonry brick / International Journal of Civil Engineering and Technology 9(6):656~664
Al-Fakih, A. / 2020 / Experimental study on axial compressive behavior of rubberized interlocking masonry walls / Journal of Building Engineering 1(29):101107
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Utilization of PTE and LDPE Plastic Waste and Building Material Waste as Bricks
한국재료학회지
2019 .01
-
Impacts of sintering temperature on the mechanical properties and gamma ray protection capacity of clay bricks
Nuclear Engineering and Technology
2024 .07
-
A unique Vietnam's red clay-based brick reinforced with metallic wastes for γ-ray shielding purposes: Fabrication, characterization, and γ-ray attenuation properties
Nuclear Engineering and Technology
2024 .04
-
순환경제를 위한 PET병 물질흐름분석과 재활용에 따른 온실가스 감축량 산정 연구
한국폐기물자원순환학회지
2021 .08
-
A Study on Manufacturing Characteristics for Ash Bricks with Different Weight Mixing Ratio of Waste Incineration Ashes and Steel Slag
한국환경기술학회지
2020 .01
-
Real Time 3D Segmentation System Based on YOLOv8 and SAM for Sorting Recyclable Plastic Bottle Waste
한국통신학회논문지
2024 .09
-
폐기성 낙엽을 활용하기 위한 벽돌 개발 및 환경성 평가
한국건축친환경설비학회 논문집
2025 .02
-
전통 수제 전돌과 다양한 모르타르로 구성된 조적조의 역학적 특성
대한건축학회논문집
2023 .05
-
Identification for Drinking Spout of Plastic Bottle Using Multi Eff-UNet
제어로봇시스템학회 국제학술대회 논문집
2022 .11
-
Study on Interlocking System in Indonesia
한국철도학회 학술발표대회논문집
2015 .05
-
Unconfined compressive strength of PET waste-mixed residual soils
Geomechanics & engineering
2015 .01
-
Experimental Investigation of Clay Fly Ash Bricks for Gamma-Ray Shielding
Nuclear Engineering and Technology
2016 .01
-
Mechanical Properties and Flexural Strength of Reinforced Concrete Beams Containing Waste Material as Partial Replacement for Coarse Aggregates
International Journal of Concrete Structures and Materials
2023 .01
-
폐석회석을 이용하여 단열블록 제조 시 열전도에 미치는 영향인자 분석
한국폐기물자원순환학회지
2016 .01
-
The manufacturing of sintered bricks from clay and red mud derived from the alumina processing plant
Journal of Ceramic Processing Research
2017 .05
-
건식조립용 인터락킹 벽돌의 재료물성 연구
한국콘크리트학회 학술대회 논문집
2021 .11
-
방사선에 의한 폐폴리우레탄의 분해 거동
방사선산업학회지
2017 .01
-
황토 벽돌의 재료구성 및 공극률이 압축강도와 내수성에 미치는 영향
콘크리트학회 논문집
2019 .08
-
Degradation of Polyethylene Terephthalate (PET) Through Polyethylene Terephthalate-degradingEnzyme (PETase)
한국생물공학회 학술대회
2021 .04
-
Finite element simulation of traditional and earthquake resistant brick masonry building under shock loading
Coupled systems mechanics
2015 .01
이 논문의 저자 정보
이 논문과 함께 이용한 논문
Progress in bioremediation of pesticide residues in the environment
Balendu Shekhe
,
Gi
,
i
외 18명
Environmental Engineering Research
2021
.12
Screening and selection of autochthonous fungi from leachate contaminated-soil for bioremediation of different types of leachate
Yassine Zegzouti
,
Aziz Boutafda
,
Loubna El Fels
외 5명
Environmental Engineering Research
2020
.10
Electrooxidation of tannery wastewater with continuous flow system: Role of electrode materials
T
,
an Tan Tien
,
T
외 1명
Environmental Engineering Research
2020
.06
Non-Biodegradable biopolymers by Biotechnology
Alexande
,
STEINBüCHEL
한국생물공학회 학술대회
2018
.10
난분해성 질소를 함유하는 전자폐수의 생물학적 처리를 위한 독성 평가
김지연
,
이선주
,
김정현
외 2명
한국지반환경공학회 학술발표회논문집
2016
.09
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2020-532-000682165