지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- Korean Society for Precision Engineering Journal of the Korean Society for Precision Engineering Journal of the Korean Society for Precision Engineering Vol.37 No.8
- 발행연도
- 2020.8
- 수록면
- 595 - 600 (6page)
- DOI
- 10.7736/JKSPE.019.054
이용수
초록· 키워드
오류제보하기
The article presents the influence of the deformation process on the microstructure and mechanical properties of low carbon alloy steel which heat treatment by TBF processing. When the samples are deformed at different levels: 20, 40, and 80%. The research results show that when the sample was deformed with the 80%, the highest strength was 800 MPa, the highest elongation was 36%, the product between the strength and the elongation (Rm*A) was the highest, 28774 MPa*%. This alloy deformed at a level of 80%, the content of austenite in this microstructure of this alloy was the highest about 16%. The content of ferrite was 52% with the average particle size of ferrite was 6.4 μm, the particle of residual austenite was 2 μm. The results of the microstructure have contributed to improving the mechanical properties of steel. The phase which was improved the mechanical properties of this alloy had grain size and dispersed.
목차
1. Introduction
2. Materials and Method
3. Results and Discussion
4. Conclusion
REFERENCES
참고문헌 (8)
참고문헌 신청
Tomohiko, H., Tomohiro, K., and Koh-Ichi, S., “Effects of Alloying Elements on Impact Properties of Ultra High-Strength Trip-Aided Bainitic Ferrite Steels,” NIT, Tsuyama College- Repository, Vol. 52, pp. 9-16, 2010.
Kobayashi, J., “A Basic Study on the Microstructure and Mechanical Properties of Ultrahigh-Strength Trip-Aided Martensitic Steel,” Doctoral Dissertation, Shinshu University, 2014.
Demeri, M. Y., “Advanced High-Strength Steels: Science, Technology, and Applications,” ASM International, 2013.
El-Din, H. N., Showaib, E. A., Zaafarani, N., and Refaiy, H., “Structure-Properties Relationship in TRIP Type Bainitic Ferrite Steel Austempered at Different Temperatures,” International Journal of Mechanical and Materials Engineering, Vol. 12, No. 1, pp. 1-9, 2017.
Padgett, M. C., “Phase Transformations during Cooling of Automotive Steels,” M.Sc. Thesis, The University of Alabama, 2017.
Kobayashi, J., “A Basic Study on the Microstructure and Mechanical Properties of Ultrahigh-Strength Trip-Aided Martensitic Steel,” Doctoral Dissertation, Shinshu University, 2014.
Demeri, M. Y., “Advanced High-Strength Steels: Science, Technology, and Applications,” ASM International, 2013.
El-Din, H. N., Showaib, E. A., Zaafarani, N., and Refaiy, H., “Structure-Properties Relationship in TRIP Type Bainitic Ferrite Steel Austempered at Different Temperatures,” International Journal of Mechanical and Materials Engineering, Vol. 12, No. 1, pp. 1-9, 2017.
Padgett, M. C., “Phase Transformations during Cooling of Automotive Steels,” M.Sc. Thesis, The University of Alabama, 2017.
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Effect of Transformation Temperature on the Ferrite–Bainite Microstructures, Mechanical Properties and the Deformation Behavior in a Hot-Rolled Dual Phase Steel
Metals and Materials International
2021 .01
-
Effect of δ-Ferrite Evolution and High-Temperature Annealing on Mechanical Properties of 11Cr3W3Co Ferritic/Martensitic Steel
Metals and Materials International
2016 .01
-
Correlation Between Constituent Phase and Weld Metal Properties in Ni-Reduced Duplex Stainless Steel
Metals and Materials International
2022 .08
-
압력용기용 A516 강의 미세조직에 미치는 탄소 당량과 냉각 속도의 영향
한국재료학회지
2019 .01
-
A study of fatigue crack growth behaviour for Ferrite-Bainite dual phase steel between base metal and HAZ
대한용접학회 특별강연 및 학술발표대회 개요집
2015 .11
-
Influence of Cooling Rate on Secondary Phase Precipitation and Proeutectoid Phase Transformation of Micro-Alloyed Steel Containing Vanadium
Metals and Materials International
2016 .01
-
Extending the Boundaries of Mechanical Properties of Ti-Nb Low-Carbon Steel via Combination of Ultrafast Cooling and Deformation During Austenite-to-Ferrite Transformation
Metals and Materials International
2017 .01
-
유정용 강관의 미세조직 및 기계적 성질에 미치는 열처리의 영향
한국산학기술학회 논문지
2017 .05
-
제어 압연과 가속 냉각에 의해 저탄소강에서 형성되는 미세조직의 특징과 구분
한국재료학회지
2017 .01
-
페라이트-오스테나이트 2상역 온도에서 미량합금 원소가 첨가된 탄소강의 재결정 거동
한국재료학회지
2016 .01
-
Comparison of Tension and Compression Behavior of Advanced High Strength Steels
한국소성가공학회 학술대회 논문집
2020 .06
-
Influence of Microstructure on Low-Cycle and Extremely-Low-Cycle Fatigue Resistance of Low-Carbon Steels
Metals and Materials International
2021 .10
-
Plastic Behavior of Ferrite–Pearlite, Ferrite–Bainite and Ferrite–Martensite Steels: Experiments and Micromechanical Modelling
Metals and Materials International
2021 .01
-
Ferrite-Bainite dual phase 강의 피로균열진전 특성 평가
대한용접·접합학회지
2016 .02
-
Microstructure and Mechanical Properties of Austempered Medium-Carbon Spring Steel
Metals and Materials International
2018 .01
-
API X70 라인파이프 강재의 변형 시효 특성에 미치는 미세조직의 영향
한국재료학회지
2018 .01
-
Bauschinger Effect or Kinematic Hardening: Bridging Microstructure and Continuum Mechanics
Metals and Materials International
2023 .03
-
해양플랜트용 후판강의 미세조직과 기계적 특성에 미치는 압연 조건의 영향
한국재료학회지
2018 .01
-
Mn 및 V 함량이 다른 페라이트-펄라이트 조직강의 강도와 변형능에 미치는 미세조직 인자의 영향
한국재료학회지
2018 .01
-
Influence of Microstructure Constituents on the Hydrogen?Induced Mechanical Degradation in Ultra?High Strength Sheet Steels
Metals and Materials International
2021 .10
이 논문의 저자 정보
이 논문과 함께 이용한 논문
A Study on the Machinability of Tungsten Carbide Using Ultrafast Laser
신영관
,
최원석
,
김훈영
외 1명
Journal of the Korean Society for Precision Engineering
2020
.10
Performance Test of 3D Printed Blades for a Scaled Wind Turbine in a Wind Tunnel
김동명
,
백인수
,
원병철
외 1명
Journal of the Korean Society for Precision Engineering
2020
.09
Development of Motion Platform-Based Exercise Equipment for Rehabilitation Training and Posture Balance
박성관
,
김준희
,
서명인
외 2명
Journal of the Korean Society for Precision Engineering
2020
.07
Hardware Design of 3-Axis Motion Platform with Load Compensation Mechanism
박정우
,
김효곤
,
최영호
외 2명
Journal of the Korean Society for Precision Engineering
2020
.06
Design of Prosthetic Robot Hand and Electromyography-Based Hand Motion Recognition
장호명
,
손정우
Journal of the Korean Society for Precision Engineering
2020
.05
최근 본 자료
댓글(0)
0