메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
정재호 (서울대학교 공과대학 섬유고분자공학과) 이승구 (충남대학교 공과대학 섬유공학과) 강태진 (서울대학교 공과대학 섬유고분자공학과)
저널정보
한국섬유공학회 한국섬유공학회지 한국섬유공학회지 제36권 제5호
발행연도
1999.1
수록면
372 - 382 (11page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
The effect of crimp geometry on the mechanical properties of nonwoven fabrics of different punching densities was studied. The theoretical modulus of crimped fiber assembly was derived and the three factors that affect the contact behavior between fibers in nonwoven fabrics were specified. If the crimped yarn has the same volume and orientation density function as the flat fiber, the contact points were increased proportional to the square of the crimp ratio. The crimp in the yarn acts as the slip barrier, which results in the decrease in slip portion of contact points as well as the contact point load, and thus it results in the increase of the yarn modulus. The modulus of the needle punched nonwoven made with crimped fiber varied with the contact length of the fiber. As the contact distance between two adjascent fiber decreases, the effect of crimp diminishes. These factors generally increase the modulus of the nonwoven fabrics. Especially in bending properties, the increased crimp potential and number of contact points contribute to the increase in bending rigidity along with increasing thickness. Post treatment of the nonwoven fabrics after needle punching removes the residual moment in the nonwoven system and it helps the resilience properties of the nonwoven.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0