지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
초록· 키워드
오류제보하기
NIL (nanoimprint lithography) technique has demonstrated a high potential for wafer size definition of nanometer as well as micrometer size patterns. During the replication process by NIL, the stiction between the stamp and the polymer is one of major problems. This stiction problem is moi·e important in small sized patterns. An antistiction layer prevents this stiction ana insures a clean demolding process. In this paper, we were using a TCP (transfer coupled plasma) equipment and $C_4F_8$ as a precursor to make a Teflon-like antistiction layer. This antistiction layer was deposited on a 6 inch silicon wafer to have nanometer scale thicknesses. The thickness of deposited antistiction layer was measured by ellipsometry. To optimize the process factor such as table height (TH), substrate temperature (ST), working pressure (WP) and plasma power (PP), we were using a design of experimental (DOE) method. The table of full factorial arrays was set by the 4 factors and 2 levels. Using this table, experiments were organized to achieve 2 responses such as deposition rate and non-uniformity. It was investigated that the main effects and interaction effects between parameters. Deposition rate was in proportion to table height, working pressure and plasma power. Non-uniformity was in proportion to substrate temperature and working pressure. Using a response optimization, we were able to get the optimized deposition condition at desired deposition rate and an experimental deposition rate showed similar results.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
PECVD를 이용한 금속 스탬프용 점착방지막 형성과 특성 평가
한국재료학회지
2006 .01
-
나노임프린팅 공정을 위한 점착방지막 형성
한국소성가공학회 학술대회 논문집
2006 .05
-
핫 엠보싱용 점착방지막으로 사용되는 10nm급 두께의 Teflon-like 박막의 형성 및 특성평가
한국재료학회지
2005 .01
-
기상 자기조립박막 법을 이용한 나노임프린트용 점착방지막 형성 및 특성평가
한국재료학회지
2007 .01
-
다결정 실리콘 마이크로머시닝 제작 시 폴리머 지지를 이용한 옆 방향 점착방지 방법의 제안
대한전기학회 학술대회 논문집
1999 .07
-
Numerical Analysis of Pressure and Temperature Effects on Residual Layer Formation in Thermal Nanoimprint Lithography
반도체디스플레이기술학회지
2013 .01
-
Functional Polymer Thin Films based on the Layer-by-Layer Deposition
한국고분자학회 학술대회 연구논문 초록집
2006 .10
-
Effect of Plasma Treatment to Surface of the Titanium Oxide Deposited by Plasma Enhanced Atomic Layer Deposition
한국재료학회 학술발표대회
2007 .01
-
Influence of the O/Al ratio on the properties of Al₂O₃ barrier layers deposited by plasma-enhanced atomic layer deposition
한국고분자학회 학술대회 연구논문 초록집
2013 .10
-
유한요소해석을 통한 Plasma Enhanced Atomic Layer Deposition 장비 유동 가시화 연구
대한기계학회 춘추학술대회
2020 .07
-
AN EXPERIMENTAL STUDY OF PARTICLE DEPOSITION DURING THE OUTSIDE VAPOR DEPOSITION PROCESS
KSME/JSME THERMAL and FLUID Engineering Conference
1996 .10
-
Deposition Profile Control of Carbon Films on the Surface of Fine Structures using Plasma CVD
한국표면공학회 학술발표회 초록집
2010 .11
-
ALD 공정에서의 플라즈마 응용
한국표면공학회 학술발표회 초록집
2015 .05
-
A Study on the Uniformity Improvement of Residual Layer of a Large Area Nanoimprint Lithography
반도체디스플레이기술학회지
2010 .01
-
Characterization of Thin Films deposited at Low Temperature by using Atomic Layer Deposition and E-beam Evaporation
한국생산제조학회 학술발표대회 논문집
2014 .09
-
열 나노임프린트 공정 개선에 관한 연구
한국생산제조학회 학술발표대회 논문집
2011 .04
-
Low-Temperature Growth of SiO2 Films by Plasma-Enhanced Atomic Layer Deposition
[ETRI] ETRI Journal
2005 .02
-
AlSi12 분말의 직접 레이저 용융 적층 시 공정 조건에 따른 적층 특성에 관한 연구
소성·가공
2018 .10
-
다결정 실리콘의 화학증착에 대한 연구
산업과학연구 : 강원대학교 산업과학연구소
1982 .01
-
Stress Analysis in Cooling Process for Thermal Nanoimprint Lithography with Imprinting Temperature and Residual Layer Thickness of Polymer Resist
반도체디스플레이기술학회지
2017 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0