지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
이 논문의 연구 히스토리 (2)
- 이 논문의 후속연구가 궁금하신가요?
- 연관 학술논문 또는 학술발표를 통해 보다 발전된 연구결과를 확인하실 수 있습니다.
- 이 논문의 연구 히스토리 확인하기
초록· 키워드
오류제보하기
Grain-oriented electrical steel sheets are mainly used as core materials for transformers and motors. They should have excellent magnetic properties such as low core loss, high magnetic flux density and high permeability. In order to improve the magnetic properties of the electrical steel sheet, it is important to form Goss oriented grains with a very strong {110}<001> orientation. Recently, efforts have been made to develop Goss grains by controlling processes such as hot rolling, cold rolling, and primary and secondary recrystallization. In this study, the sheets containing 3.2 and 3.4wt.% Si were used, which were rolled with 1 and 10 passes with total thickness reduction of 89%. Heating was carried out for primary recrystallization with different heating rates of $25^{\circ}C/s$ and $24^{\circ}C/min$ until $720^{\circ}C$. The behavior of Goss-, {411}<148>-, and {111}<112>-oriented grains were analyzed using X-ray diffraction(XRD) and electron back-scatter diffraction(EBSD) analysis. The area fraction of Goss-oriented grains increased with the number of rolling passes during cold rolling; however, after the primary recrystallization, the area fraction of the Goss grains was higher and exact Goss grains were found in the specimens subjected to rapid heating after one rolling pass.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Influence of Heat Treatment on Stainless Steel 316L Alloy Manufactured by Hybrid Additive Manufacturing Using Powder Bed Fusion and Directed Energy Deposition
Metals and Materials International
2023 .03
-
Asymmetry rolling and Goss texture change of low carbon steel sheet
한국소성가공학회 학술대회 논문집
2021 .11
-
비대칭 압연한 IF 강 판의 Goss 집합조직 발달
소성·가공
2017 .06
-
Misorientation Characteristics at the Growth Front of Abnormally-Growing Goss Grains in Fe?3%Si Steel
Metals and Materials International
2021 .12
-
Effect of Asymmetric Hot Rolling on the Texture Evolution of Fe–3%Si Steel
Metals and Materials International
2018 .01
-
Effects of Grain Boundary on {100} Recrystallization Texture of High Silicon Electrical Steel
Metals and Materials International
2018 .01
-
EBSD analyses of ultrafine-grained 0.18 wt.%C steel subjected to differential-speed rolling and static-recrystallization
한국소성가공학회 학술대회 논문집
2021 .05
-
비대칭 압연에 의한 방향성 전기 강판의 GOSS 방위 형성과 자성 특성
한국소성가공학회 학술대회 논문집
2016 .10
-
Texture Evolution of Hot Rolled Al–Cu–Mg–Zr Alloy During Annealing
Metals and Materials International
2022 .12
-
탄탈륨 판재의 어닐링 집합조직과 결정립 크기
소성·가공
2019 .10
-
순도에 따른 Al 판재의 재결정 거동
한국재료학회지
2016 .01
-
Grain Refinement of CoNiCrMo Non-equiatomic Medium Entropy Alloy
Metals and Materials International
2023 .01
-
Si 강판의 비대칭 압연 집합조직 변화
한국소성가공학회 학술대회 논문집
2016 .10
-
강의 비대칭 압연과 GOSS 집합조직 변화
한국소성가공학회 학술대회 논문집
2019 .05
-
Bimodal-Structured Al?Mg Alloy with High Strength and Ductility Processed by High Strain Rate Rolling at Medium Temperature
Metals and Materials International
2021 .12
-
Al-4.0%Zn-1.5%Mg-0.9%Cu 합금의 압출, 압연 및 열처리에 따른 미세조직 변화
열처리공학회지
2018 .01
-
Nucleation Mechanism of Discontinuous Dynamic Recrystallization with Restrained Grain Boundary Sliding
Metals and Materials International
2021 .12
-
이주속압연된 Ni-30Cr 합금의 미세조직과 기계적 특성 발달
한국재료학회지
2015 .01
-
비접촉식 냉연강판 Grain Size 측정 기술 개발
제어로봇시스템학회 국내학술대회 논문집
2019 .05
-
Microstructure and Texture Evolution of Rolled Plate for Cu?15Cr In-Situ Composite
Metals and Materials International
2021 .11
이 논문의 저자 정보
최근 본 자료
댓글(0)
0