Study on the Properties of UV Curing Thermal Conductive and Pressure Sensitive Adhesive Using Inorganic Fillers

Oh, Ji-Hwan; Choi, Jin-Yeong; Kim, Su-Hwan; Jang, Se-Hoon; Shin, Yoo-Jin; Kim, Dae-Hyun; Yoo, Hwan-Kyu; Cho, Ur Ryong

추천

검색

자료유형: 학술저널

저자정보: Oh, Ji-Hwan (School of Energy, Materials, Chemical Engineering, Korea of Technology and Education, Korea University of Technology and Education) Choi, Jin-Yeong (School of Energy, Materials, Chemical Engineering, Korea of Technology and Education, Korea University of Technology and Education) Kim, Su-Hwan (School of Energy, Materials, Chemical Engineering, Korea of Technology and Education, Korea University of Technology and Education) Jang, Se-Hoon (School of Energy, Materials, Chemical Engineering, Korea of Technology and Education, Korea University of Technology and Education) Shin, Yoo-Jin (School of Energy, Materials, Chemical Engineering, Korea of Technology and Education, Korea University of Technology and Education) Kim, Dae-Hyun (School of Energy, Materials, Chemical Engineering, Korea of Technology and Education, Korea University of Technology and Education) Yoo, Hwan-Kyu (School of Energy, Materials, Chemical Engineering, Korea of Technology and Education, Korea University of Technology and Education) Cho, Ur Ryong (School of Energy, Materials, Chemical Engineering, Korea of Technolog)

저널정보: 한국고무학회 Elastomers and composites 엘라스토머 및 콤포지트 제52권 제1호

발행연도: 2017.1

수록면: 22 - 26 (5page)

이용수

📌

연구주제

📖

연구배경

🔬

연구방법

🏆

연구결과

초록· 키워드

오류제보하기

The thermal conductivity and the adhesive properties were measured, after synthesis of thermal conductive composite which was obtained as a result of mixing alumina or graphite with acrylic adhesive synthesized by UV polymerization. The adhesive properties of the composite were evaluated measuring the peel strength at 180 degrees, the retention, and the initial tack;the thermal conductivity was estimated using laser flash analysis. As the filler contents increased, a decrease in peel strength and initial tack and an increase in retention and thermal conductivity were observed. When compared to alumina, the adhesion of graphite showed a dramatic decrease, whereas the thermal conductivity was further enhanced. It was found out that the small size of graphite increased the mechanical interlocking between the polymer and the filler, and it was easier for graphite to come into contact with other graphite in the matrix.

#UV polymerization #UV curing adhesive #thermal conductive adhesive #alumina #graphite

참고문헌 (12)

참고문헌 신청

윤홍범 / 2014 / 광개시제의 종류에 따른 2-EHA/AA 점착제의 접착특성 / 폴리머 38(4):491~495

J. Kajtna / 2011 / Solventless UV Crosslinkable Acrylic Pressure Sensitive Adhesives / International Journal of Adhesion and Adhesives 31:822

M. R. Haddon / 1991 / The Chemistry and Applications of UV Cured Adhesives / International Journal of Adhesion and Adhesives 11:183

J. Kajtna / 2014 / Synthesis and Dynamic Mechanical Analysis of Nanocomposite UV Crosslinkable 100% Solid Acrylic Pressure Sensitive Adhesives / International Journal of Adhesion and Adhesives 49:18

B. Tang / 2015 / Application of Graphene as Filler to Improve Thermal Transport Property of Epoxy Resin for Thermal Interface Materials / Int. Journal of Heat and Mass Transfer 85:420

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!